2018 Toyota Tacoma 89170-04690

[is94ns13]

Hello
Is there a way to read crash data from this module with out opening module? i got iprog and carprog for tools
And if it cannot be done is there a good way to open it with this module having that shield in the back where screws are. See pictures
thank you

[ateyourv8]

This is eeprom 95M01, i just heat the backside of the black plate and pull it off, its only glued together with double sided tape. Then heat again and re apply once finished.
There is also a hidden screw underneath of the glue that you have to find.

[is94ns13]

i guess Carprog and iprog will not read 95m01.
Is there better tool i could buy that would read 95m01?

[long beach]

read it has M25P10

[is94ns13]

i dont have that option in iprog or carprog

[ateyourv8]

What version of carprog do you have? I know for a fact car prog has 95M01, unless you have some old clone.
It might not have this part number but go to eeprom in the menu tree and look for 95M01.
If not, CPT can read it.

[is94ns13]

Im using clone 10.93 and i actually have 95m01 option it just dont work, i get error message "No response from unit" and if i read other eeproms no issues