BMW EDC16CP35 Virgin Eprom

[koolstuff]

Hi there,
i have a problem to synch an EDC16CP35 to cas, Original ECU is lost and i have a cas3 & DDE set, car started but no shifting gears because of EGS, and i need a virgin 95640 eprom.

Thanks in Advance.

[trinicolin]

Hi there,
i have a problem to synch an EDC16CP35 to cas, Original ECU is lost and i have a cas3 & DDE set, car started but no shifting gears because of EGS, and i need a virgin 95640 eprom.

Thanks in Advance.Need to reset EGS then adapt.

Sent from my SM-G930F using Tapatalk

[brobble]

Leave original CAS in car and only change ISN from original CAS to ecu, sync and car should run. Or did you try exactly that?

Greets MR...

[koolstuff]

I have a set both ecu and cas3 but car starts but does not shift gears, so i took back original cas and make key to that cas and car crank but not start, so i tried to synch new ecu and cas but it says not possible, i have tried VVDI2 VVDI BMW CGDI and FVDI, all of them can't do it, i put 4bits ISN from cas to ECU but i have DTC EWS tempering.

[exxl]

I had before few weeks same issue with sync ecu to cas on e65, vvdi and fvdi could not do it i solved it with ista-d, ista-d solved for me the sync problem

Poslano sa mog SM-G975F koristeći Tapatalk

[koolstuff]

Problem solved thanks, i asked a friend to come and synch with bmw explorer.

[ASCM]

Which steps he used for sinc

Sent from my SM-J415F using Tapatalk

[koolstuff]

I said earlier that i had a full set ECU & CAS3 + Key, so i gave it to him and told him where the car was, after he called saying that it's done, Car was at a cousin workshop.