Speedlimiter Vw Transporter T5 1.9

[awautosport]

Hello,


I am looking for the speed limiter in the flash of a VW Transporter T5 1.9 tdi EDC16U1 038 906 016, 0281010734. I have already adjusted this in the Eeprom but this does not work. The speed limiter has to be at 25km, yes it is 25km per hour. Who can help me? Or a good damos pack for this ecu.


I wish everyone a merry Christmas.


Greetings Alex

[cupsi]

Here is ur file..

[oliva]

https://obrazki.elektroda.pl/4770461600_1608894663_thumb.jpg (https://obrazki.elektroda.pl/4770461600_1608894663.png)

[awautosport]

Hello file dont work i have no speed limiter

[awautosport]

Anyone have an idea to solve this problem?


Greetings Alex

[chli1976]

You can do it with VCDS, but only decrease. For increasing you need a special login. I think ipost them here on forum.

[awautosport]

you referred to engine,adaptation and then channel 7? this doesn't work for me or i have to do something wrong?

[icezero2010]

you referred to engine,adaptation and then channel 7? this doesn't work for me or i have to do something wrong?

you must mod gear limiter this is the only way to do it . problem is the car must also run 25 without speed signal . so the only way is limit by rpm

[icezero2010]

you referred to engine,adaptation and then channel 7? this doesn't work for me or i have to do something wrong?

here so u must do the rpms not correct u can set by self or say me all rpm u need in what gear but so must limit

[chli1976]

you referred to engine,adaptation and then channel 7? this doesn't work for me or i have to do something wrong?

Look on other adaptions channel also. Maybe you need before a login 12233

[awautosport]

Yes i login with 12233 and i see on channel 7 de maximum speed is 25 kmh but not working

[chli1976]

Look at channel 14 and 18

[zip]

Check meas. block 027.
If there is no limit there all you trying not gonna work. Only way is as icezero say, limit rpm/tq values on all gears and you r good to go.

[awautosport]

no active channel 14 or 18

[icezero2010]

no active channel 14 or 18

here new file with correct rpm

@chli vmax work only to 50 kmh not lower and must also work without speed signal

so is my way only good for him

[zip]

You need to login to those channels.
Sec access first 12233 and then you can open 14 or 18

[cupsi]

Check meas. block 027.
If there is no limit there all you trying not gonna work. Only way is as icezero say, limit rpm/tq values on all gears and you r good to go.

mate, now u delete some messages, ur inbox is full :D