RNS510 Black screen

[metoo77]

Hi, I have RNS510 with black screen mistake, can someone help with S29AL016D dump?
1T0035680P SW5238 HW10
Or if possible repair mine
Thanks in advance

[Mikle1]

Hi, I have RNS510 with black screen mistake, can someone help with S29AL016D dump?
1T0035680P SW5238 HW10
Or if possible repair mine
Thanks in advance

Try this .

[metoo77]

tried, same problem, thanks

[Mikle1]

tried, same problem, thanks
have s29gl032 if you need

[navserwis]

have s29gl032 if you need s29GL032 it's only media.
Firmware is in S29AL016...in this case mainbord to trash

[metoo77]

s29GL032 it's only media.
Firmware is in S29AL016...in this case mainbord to trash

I don't think that, there is someone here managed to repaire his radio by flashing also MCU.

[navserwis]

OK good lack

[Bult2020]

have s29gl032 if you need

Can I ask you to share the s29gl032 file in software version 5238.
I have a RNS 510 HW10 SW 5238 and I only had files 3970, unfortunately to no avail (no communication setconfig, martech) only after uploading your file S29AL016 SW 5238 the navi came to life to some extent, now there is half communication (no service mode, and normal but it loads 1 stage) displays such information in the monitor (setconfig) :






Vancouver CSL v007.007.004


Starting Boot Loader 1...


UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UUUUUUUU


---- RAM-INIT +: InfoLog ILstart fffc0000 ILend fffe0000 33 [ms]


---- RAM-INIT -: InfoLog ILstart fffe0000 ILend fffe0000 33 [ms]
61681027 NMBH_Init - Assuming in Bootloader


[tBoot(3):70012d1f] Found no supported device on bank 0.
E1687011 Unable to retrieve partition /wtil


E1681029 NMBH_Init - Abort Nand Media handler due to unavailable partition


+++ task : startBlMain id FFDD6A88 prio 00000001


-> BL 66 [ms] : Start Application : call BlMain()


>BL [66 ms]:+++ task : Controll_Loop id FFDFE318 prio 0000005B


>BL [66 ms]: p32ShPointer_SharedMemory = F0701EE0


>BL [66 ms]:


>BL [66 ms]:================================================= =====
>BL [100 ms]: (c) 2005 Siemens VDO Automotive AG
>BL [100 ms]: CP-X Platform Bootloader
>BL [100 ms]: Version: 13.55.05
>BL [100 ms]: Date : Sep 25 2012
>BL [100 ms]: Time : 11:33:08
>BL [100 ms]:THIS VERSION IS AN OFFICIAL DELIVERY
>BL [116 ms]:================================================= =====




>BL [116 ms]:======= Mainprint-Info =====================
>BL [116 ms]: item len value
>BL [116 ms]: PlatformId 00000004: 00010002
>BL [116 ms]: ProductId 00000004: 00020101
>BL [133 ms]: ModuleId 00000004: 00010002
>BL [133 ms]: HardwareId 00000004: FFFFFFFF
>BL [133 ms]: ProductionDate 00000004: 20130228
>BL [133 ms]: Serial-Number 0000000F:
>BL [133 ms]: A2C-Number 0000000F:
>BL [166 ms]:================================================= =====




>BL [166 ms]:ShowReleaseInfos


So I think I need to write corect SW s29gl032 file.
I will be grateful if you share

[mantasel]

Hello, maybe You have working motherboard dumps for RNS510 3C0 035 684 Q HW: H27 SW: 5378 (NA unit)? Black screen after MRM change car model type to EU model and loading frimware version 6270
Do i need s29gl032 ??