Opel Astra h CIM replace

[emteusz]

Hello, i had car opel astra H 2005 year, but there is a problem, blinkin car with key, and readed codes is p1616 - wrong identifier, so i have changed a cim module, installed, and logged with good pin, next i have reset all modules with immo - uec, rec etc.. and still problem with ecu P1616, someone had this problem? i cant add transponders, and still this problem, i tryied with opcom, tech2, abrites, opel scanner, checked- cables, changed modules what have connect to immo - ipc, rec, ecu. when i trying to log in uec rec, on blocks there is 'not programmed'


second question, i dont remember do i logged off OLD cim, is this needly to make this?

Thanks!

[rafal]

possibilities:
1- bad used one cim
2- not correct adapted donor cim
https://youtu.be/G9m-X0mLrLg

[ladadens1]

opcom do it with right procedure

[emteusz]

what does it mean bad used? The CIM was same numbers (all)
2. adapted well, with instructions availible with experience - i had some cars with changed cim's and all ok, so here i tryin to find why it not work

[rafal]

maybe donor cim corrupted - without dump we can only divination from the stars
your question look's like from little boy with broken toy

[smirnoff_rules]

normally easy to replace, must be a problem with used cim , water in fusebox

[emteusz]

my english is not good, so i trying to write exactly my problem and asking, so You can see that im little boy with broken toy,
@smirnoff_rules (https://www.digital-kaos.co.uk/forums/member.php/46-smirnoff_rules)
Thanks for reply, i have check fusebox in front and rear - thats all ok,

Also
I have tryied to update software with GM by sps (online with GM) and
-> ecu update successfull, when i try to update CIM, sps show me that a new version availible (by number)and I accepted, 1 min after the message like contact to the technical support

[12manux]

Making a SPS (update procedure) to CIM is a good known method to kill it .


What type of eeprom does it have the donor CIM module ? It has MCU or 95xx eprom ?


I can help you thru teamviewer and recover your dead cim and fix your dump .


If you want my assistance just contact me in private . (free)

br

[talazso]

Greeting! This is a problem for me too! Is there a successful solution?