P1603 Eeprom data corrupted Focus 1.6tdci

[yoxardas]

Hello everyone, can someone help me fix my focus 2005 with p1603 error after battery swap? car wont start, I have read the 91560 from ecu 0281011263 4m51-12a650-nd Thank you.

[kiszka]

Hello everyone, can someone help me fix my focus 2005 with p1603 error after battery swap? car wont start, I have read the 91560 from ecu 0281011263 4m51-12a650-nd Thank you.

https://mega.nz/file/g6ZjHCAY

[yoxardas]

https://mega.nz/file/g6ZjHCAY

Haha, your dump works flawlessly, thank you so much!

[dany mec]

Hello i have a p1603:disturbed: eprom data corrupted and P1602 immobiliser ecu 0 281 015 242 / 1039s27540 , the car not start after battery discharge.
Can help:bebored: ?
i use for read BDM 100.

[MartiLer]

read eeprom

[dany mec]

Hello here.

[Afortunao]

Can someone help me.., Ford Focus, eeprom data corrupted. I have read the 91560 from ecu BOSCH 0 281 011 263 _ 4M51-12A650-ND _ 1039S08128. Thank you.

[kiszka]

Can someone help me.., Ford Focus, eeprom data corrupted. I have read the 91560 from ecu BOSCH 0 281 011 263 _ 4M51-12A650-ND _ 1039S08128. Thank you.
eeprom ok
please report me
https://mega.nz/file/ZmY3lYhB

[Afortunao]

thanks for the help friend. Unfortunately it has not worked. the car is still unable to connect for diagnosis with the engine ecu ..., as before, it connects but when it reads fault codes it says connection error.

I have also tried another engine ecu, it connects perfectly and reads fault codes for diagnosis, but when I cloned it, it failed the same as the original.

I attach the original files read in the engine control unit, and the instrument panel. Maybe someone can help match

[kiszka]

thanks for the help friend. Unfortunately it has not worked. the car is still unable to connect for diagnosis with the engine ecu ..., as before, it connects but when it reads fault codes it says connection error.

I have also tried another engine ecu, it connects perfectly and reads fault codes for diagnosis, but when I cloned it, it failed the same as the original.

I attach the original files read in the engine control unit, and the instrument panel. Maybe someone can help match

read flash ecu and share

[mariazo84]

hello i have corrupgted eproom need good file

[kiszka]

hello i have corrupgted eproom need good file

https://mega.nz/file/46xTlISI

[mariazo84]

Hello mate. the car starts but does not allow to code injectors and follows code 1603. any ideas?

[mariazo84]

this flas and eprom original

[biagio4984]

please repair 95160 dump ford focus 0281011263. thanks in advance.

[vorovei constantin]

I have problems with corrupt eeprom
can you help me fix it

[kiszka]

I have problems with corrupt eeprom
can you help me fix it
This eeprom is after the transitions
read the dash eeprom

[vorovei constantin]

solved with this eeprom+ initialization

[Jacopo89]

hy, i have same problem with c-max 2007 edc1c34, can you hel me? attached 2 ori eepro files read out with eeprom programmer and newtrasdata, size are different, choose the correct, thanks a lot

[kiszka]

hy, i have same problem with c-max 2007 edc1c34, can you hel me? attached 2 ori eepro files read out with eeprom programmer and newtrasdata, size are different, choose the correct, thanks a lot
https://www.digital-kaos.co.uk/forums/showthread.php/1055231-Ford-c-max-edc16c34-P1603-immo-problem-edc16c34-0281011701

[perovuk]

hi all,1 more cmax,same problem,need synhro eeprom if posible
tnx!

[kiszka]

hi all,1 more cmax,same problem,need synhro eeprom if posible
tnx!
test pass is on PM https://mega.nz/file/8jIFTJCD

[perovuk]

tnx m8,car started

[kiszka]

tnx m8,car started
thanks for the info