Opel Corsa D Z12XEP PIN HELP

[alpntrb]

Hi there guys.
Is it possible to extract PIN from ECU (dump attached)? Readout done by Galletto v0475
Car after jumpstart lost immo and think might be problem with BCM but car is not here and can't check this by myself.
Maybe you have some ideas what could go wrong and how to solve it?


ECU Data:
Z12XEP
0261208940
1037381910
41070501


BOSCH ME7.6.2


Cheers

[rafal]

https://www.digital-kaos.co.uk/forums/showthread.php/616517-OPEL-CORSA-D

[alpntrb]

anyone have done BCM relearn with OPCOM and can guide me how to do it?

[alpntrb]

Problem solved.
Pin reading done with Carprog (OBD).
Rest done with OPCOM:
Reset BCM (virginate), switch off and take key out and leave for few seconds, then go into BCM and put pin code, switch off and take key out for few second. Then programm key and check fault codes. If wrong Environment identifer fault codes in any other module like airbag, abs, then reset that module, one at a time and taking key out after virginating and programming. If fault in ECU do same - reset it but reprogramming is done in BCM.


DO NOT reset two items (e.g. ecu and bsi ) at the same time ,then you might need new key


Might this will be helpfull someone in future.