View Full Version : Renault mono cd h3
ollync
23rd January, 2010, 10:51 AM
Is there a way to calculate code from serial
to Renault Mono Cd H3
BP8128Y2239073
7 648 128 091
I tried to read dump from mcu hc11pa8 but no succes to boot mcu. I used motorola cracker 4.3; 6.2; 7 with 8 mhz but no succes. Nobody tried to decode before.
Thanks in advance.
PremierD
23rd January, 2010, 12:15 PM
Is there a way to calculate code from serial
to Renault Mono Cd H3
BP8128Y2239073
7 648 128 091
I tried to read dump from mcu hc11pa8 but no succes to boot mcu. I used motorola cracker 4.3; 6.2; 7 with 8 mhz but no succes. Nobody tried to decode before.
Thanks in advance.
Not sure with this one mate ...0010/7786....is your choice ...
otas1
23rd January, 2010, 11:16 PM
Try 0090.
O.
Fradebo
23rd January, 2010, 11:50 PM
I'm not shure either try 3524 as a 5-button - input and confirm on 6? good luck Fradebo
Jose19
24th January, 2010, 01:27 AM
I'm not shure either try 3524 as a 5-button - input and confirm on 6? good luck Fradebo
Now you need to wait a few minutes/hours for put again code , 1,2,3,4 and confirm code on 5.
estate
24th January, 2010, 05:20 PM
Send all Foto
the radio is Blaupunkt not Philips.
PremierD
24th January, 2010, 06:31 PM
ok - you have good code
yes - or - no
YOU tell US mate ... IF you don't know A BP number from a Philips one .... You are in the wrong proffession......
arık
24th January, 2010, 06:39 PM
BP8126 MONO CD H3 RDS BLAUPUNKT
ollync
24th January, 2010, 07:27 PM
Hello.
I tried today all of your codes posted here but none work's :(
Badbad
24th January, 2010, 09:41 PM
Hello.
I tried today all of your codes posted here but none work's :(
hey try 0190 ist calc by blaupunkt/renault
regards mad
ollync
24th January, 2010, 10:03 PM
It is not working to :((
Badbad
24th January, 2010, 10:10 PM
damm,can send the dump here!!!then i give you the code!!!
ollync
24th January, 2010, 11:24 PM
Well , that 's my problem , i tried to read dump from MCU but no succes. Maybe ECU with some sort of problem ? I have read many other hc11pa8 mcu's before and there was no error, maybe interface went dead beetween ? :banghead:
Fradebo
25th January, 2010, 01:07 PM
I CHECKED .. THE RADIO IS A RENAULT TWINGO CD
IT HAS AN HC11 BUT A NORMAL ALGO
SO THE CODE MUST BE 7786
IF NOT YOU HAVE A PROBLEM
GREETZ FRADEBO
ollync
26th January, 2010, 02:54 AM
Ok. I assume somebody changed radio code; that means nobody can calculate code from serial.
Does have anybody a solution to boot MCU with motorola interface? I tried al posibilities but no succses.
andrym3
6th February, 2010, 08:03 AM
You can read HC11PA8 with simple interface max232.work 100%
QUARTZ--- 59 60
RESET --- 61 Lift pin
MOD B --- 62--GND lift pin
MOD A --- 63--No conection but lift pin!
RX --- 64 Lift pin
TX --- 1 Lift pin
PIN 25--- --GND,Lift pin
CHANGE QUARTZ TO 8 MHZ
USE MOTOROLA CRACKER 4.3 up,upa serial Or other tool!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.