Discovery 03 flashing mileage

[kiramine]

Hi can anybody help with the bcu on discovery 03 to stop mileage flashing have used tachosoft but seems to be incorrect location.....Any help would be appreciated
rgds

[PremierD]

Hi can anybody help with the bcu on discovery 03 to stop mileage flashing have used tachosoft but seems to be incorrect location.....Any help would be appreciated
rgds

You did both units I take it .....? Flashing ODO means the mileages in the units don't match mate ....

[kiramine]

Yes i did both mileage is displaying correct amount but flashing so i take it i have wrong location in bcu ?

[PremierD]

Yes i did both mileage is displaying correct amount but flashing so i take it i have wrong location in bcu ?

Looks like it mate .... ( but sometimes its the figure that you enter .... )ther are some numbers that they don;t like...Did you save original data from BSI.....?

[kiramine]

yes have both original but tachosoft says write 0s in bcu ??

[kiramine]

attached both files

[electromech]

Hi can anybody help with the bcu on discovery 03 to stop mileage flashing have used tachosoft but seems to be incorrect location.....Any help would be appreciated
rgds
Simple solution get your hands on T4 or autologic and just program BCU not to flash with different mileage

[electromech]

Simple solution get your hands on T4 or autologic and just program BCU not to flash with different mileage
Oh yes or you can just do milage update and system will update to highest milage

[PremierD]

And the original km's are ......?...161k..?

[kiramine]

yes 160889k need 133575 k if poss

[PremierD]

Try this mate .... BCU ...

[kiramine]

No still flashing bud ?

[electromech]

Ok this will go on forever you have this choices 1- set the mileage u want on the cluster and as tacho says set bcu to 0 then update 2-disable the flashing as mensioned previously 3-set mileage in cluster and bcu exactly the same. PS I just done one last week and I also pulled my hair out

[r6eck]

These program in km press button on dash to change miles reading to km ,program bsi to this km reading,job done

[PremierD]

These program in km press button on dash to change miles reading to km ,program bsi to this km reading,job done

That's why I Asked the km's mate ... Miles in dash KM's in BCU ....(that's UK spec of course ).. And that's what I put in the dump .....

[dashradio]

Done loads of these and had miles flashing, just do both units again but this time adjust the value that you put in by 100km either up or down, do this until you find a km reading that does not flash. put EXACT KM in both units, if it don't work first time try again.

[PremierD]

As I said mate ... there are some numbers they don'like ....

[kiramine]

got it to stop flashing but wont start now.........oh what a day

[electromech]

Also had this before solution = hot air station over bcu chip contacts and you will know she is right when kms flash again as stated before you will loose hair with this car

[kiramine]

Thanks for all your help guys got it sorted now and yes i am nearly bald now !!!!!

[estate]

what did you do to solve the problem? please post to help others in the future.

[kiramine]

i altered the mileage agin on the dcu and dash by 200 miles to stop flashing and starting fault was a soldering error(long day) but all ok now
rgds

[bilim]

HELP ME PASS