eFighter
4th January, 2021, 01:20 PM
Hello,
I like to read
EDC17C54
03L906012C
I have VCP with EDC17 Flash Plugin
I connect the unit on bench with this Pinout.
https://vcpsystem.com/vcpsystem/pdfs/vcp_bootmode_tools.pdf
Pin 5 12V
Pin 1 GND
Pin 87 + 92 12V
Pin 67 CanL
Pin 68 CanH
I have a 120Ohm Resistor between CanH and CanL
With this connection I can establish diag with ECU
But when I connect the 1kOhm resistor to establish bootmode I can not read the unit via VCP
No comms
Can someone give me furhter instructions what to do?
I like to read the unit to performe EGR off
Kind regards
I like to read
EDC17C54
03L906012C
I have VCP with EDC17 Flash Plugin
I connect the unit on bench with this Pinout.
https://vcpsystem.com/vcpsystem/pdfs/vcp_bootmode_tools.pdf
Pin 5 12V
Pin 1 GND
Pin 87 + 92 12V
Pin 67 CanL
Pin 68 CanH
I have a 120Ohm Resistor between CanH and CanL
With this connection I can establish diag with ECU
But when I connect the 1kOhm resistor to establish bootmode I can not read the unit via VCP
No comms
Can someone give me furhter instructions what to do?
I like to read the unit to performe EGR off
Kind regards