Rns 510 language message

[TESTASTRETTA]

Hello any idea why the RNS shows the langueage issue? The desired language could not be loaded

[dec123ua]

try to update firmware

[TESTASTRETTA]

I made upgrade and also check the ssd but problem is still the same. Somebody mentioned to "update the FW with full init" But i dont know ehat does it mean.

[TESTASTRETTA]

somebody adviced its NAND Flash issue. Which nand should i erase?

There are two 29f1g08
There is 29gl032
Also m29w160 and m29f400

Have no idea in whis the language pack is stored....

[Mikle1]

somebody adviced its NAND Flash issue. Which nand should i erase?

There are two 29f1g08
There is 29gl032
Also m29w160 and m29f400



Have no idea in whis the language pack is stored....


Which firmware installed now ?

[tmm47]

Hello any idea why the RNS shows the langueage issue? The desired language could not be loaded

hello,
same issue here, any help?

[dec123ua]

hello,
same issue here, any help?
read my previous recommendation one more time

[tmm47]

read my previous recommendation one more time

Hi, i did an update with same firmware 6276 but didn't solve the problem! how to downgrade to 6270? thank you

[dec123ua]

Hi, i did an update with same firmware 6276 but didn't solve the problem! how to downgrade to 6270? thank you
direct from SWDL mode

[tmm47]

hi again, i dve done it direct from swldl mode but the same, problem persists; everything in german; any help please?

[dec123ua]

use firmware with init

[tmm47]

how to do so?

[Mikle1]

somebody adviced its NAND Flash issue. Which nand should i erase?

There are two 29f1g08
There is 29gl032
Also m29w160 and m29f400

Have no idea in whis the language pack is stored....


There are two 29f1g08 this is NAND