PSA EDC17C60 - car dosn't start after few starrts

[number7hd]

File was modified (adblue off).
Everything was working fine. But after few engine starts and rides - Car doesn't start.
In ecu DTCs
P3028 - file modification was detected
P151A - starts blocked

Ecu was KTM Bench programmed.
Does enyone has similiar problem?

After writing eeprom car starts ok, but few times, the same as before

[momogsm]

Hi

It's Tools Problem, KTM Don't Patch Correctly The File, They Solve The Probtem Since Version 1.2.1, Use Genuine Tools, Or Use Ktag, He Will Ask For Original File, Then He Will Patch It Correctly,

Regards

[marko6jpt]

Just use Ktag and u'll be fine

[Krisfuzzy]

Put file here i will patch for you.
Regards

[Named25]

Put file here i will patch for you.
Regards
Tell me, if it's not a secret, what do you think the checksum is? And then with k-tag for a long time.

[ASCM]

Just use Ktag and u'll be fineDoes the ktag clone can make that

Sent from my 5033F using Tapatalk

[Krisfuzzy]

Tell me, if it's not a secret, what do you think the checksum is? And then with k-tag for a long time.NO checksum problem, is problem Tprot in EDC17C60
but owner dont want solve problem dont post file.

[AVDigitale]

the mod file is not good
no need patch no nothing
if file is bad patched will not work from the start not after some km stoped

[Krisfuzzy]

the mod file is not good
no need patch no nothing
if file is bad patched will not work from the start not after some km stopedmate is dtc P3028 problem and you know about i was speaking. Regards

[Junkyard Dog]

Yes its problem in ktm...try another flasher like other say

[marko6jpt]

I have done plenty with ktag, never had problem so...

[peechie]

I have done lots with Ktag 7.020 fine every time

[ASCM]

Did you tried it to make edc17c54 Passat addblu off with that ktag

Sent from my 5033F using Tapatalk

[ASCM]

I have done lots with Ktag 7.020 fine every timeReading and writing does the tool can correct checksum for edc17

Sent from my 5033F using Tapatalk

[peechie]

Did you tried it to make edc17c54 Passat addblu off with that ktag

Sent from my 5033F using Tapatalk

Yes Ktag does checksum for EDC17 and i have READ + Write EDC17C54 many times in Amarok etc fine everytime

[AVDigitale]

make dtc off or flash with other tool and will starts car

[number7hd]

I think so, that KTM is the problem. I made EDC17c60 before with KTAG and there wasn' any problem. CK are Ok but You are wright -there might be in patch problem. If it is not problem I will send files tommorow to patch. THANKS!!!

[number7hd]

Do You think DTC off will solve problem? I think that dtc will not show up but car still wouldn't start...

[ASCM]

Do You think DTC off will solve problem? I think that dtc will not show up but car still wouldn't start...Dtc off does not help for this situation

Sent from my 5033F using Tapatalk

[jurebv]

Upload the file, i will fix this for you, its tprot problem

[ASCM]

Put file here i will patch for you.
RegardsWhich memory area need patched eeprom or flash

Sent from my 5033F using Tapatalk

[Krisfuzzy]

Upload the file, i will fix this for you, its tprot problem
What i sayd 2 hour ago mate,but seem they dont believw us.

[jurebv]

Int. flash

[number7hd]

I had to attach files using MEGA server. I'm not ableusing android attach files normally

https://mega.nz/file/Mt8QSDTT#CCIcXPQp1JGMnlKy2BG1ZTbtBK-zIpgaTSVUcPYJWWs

[ASCM]

Int. flashOk just int CPU Flash area need to be
Patched after that will be everything ok forever, if the costumer make an upgrade FW of ECU to dealer
If we write this patched file does it work with new FW
Or need new patch ?

Sent from my 5033F using Tapatalk

[Gita]

TPROT 13 off

[AVDigitale]

dtc off and mask off will work too and car will start
but and patch is easy to do

Sent from my 5033F using Tapatalk[/QUOTE]

[Carli]

I had the same problem on EDC17C10 PSA, i read with flex and after that i try to write also with flex and have problem. (bench) After that i try with ktag and everything was fine. I was making DPF + ADblue off.

[ASCM]

I had the same problem on EDC17C10 PSA, i read with flex and after that i try to write also with flex and have problem. (bench) After that i try with ktag and everything was fine. I was making DPF + ADblue off.Why flex does not bypass RSA signature in edc17

Sent from my 5033F using Tapatalk

[jurebv]

here is your file with tprot off

[number7hd]

Hi guys
Yours solutions are totally difrent...
May I ask which one of You has tested it... ?
THANK You..

[number7hd]

Hi guys
Yours solutions are totally difrent...
May I ask which one of You has tested it... ?
THANK You..

[ASCM]

Hi guys
Yours solutions are totally difrent...
May I ask which one of You has tested it... ?
THANK You..Tprot off its for obd writing if you write in boot mode not necessary
Just make a good scr off

Sent from my 5033F using Tapatalk

[jurebv]

my file will work, its tested

[ASCM]

Hi guys
Yours solutions are totally difrent...
May I ask which one of You has tested it... ?
THANK You..Did you tested jurebv file

Sent from my 5033F using Tapatalk

[bobolin4o]

I had the same problem on EDC17C10 PSA, i read with flex and after that i try to write also with flex and have problem. (bench) After that i try with ktag and everything was fine. I was making DPF + ADblue off.

NONSENSE!!!
I've done many of these EDC17C10 shitty cars, exactly with FLEX in bench... NO PROBLEM!

[garageozcar]

i know how patch
i have solution

[jurebv]

nice for you, is there a point to your post? theres an entire topic about tprot patching on ecuconnectons

[number7hd]

May I please user "jurebv" to make TPROT one more time please?

[jurebv]

Best Regards

[dtrajche]

Hello, need tprot off, EDC17c60 PSA....thanks

[Named25]

tprot, EDC17c60 PSA....
Off tprot..

[sergiodc]

Hi jure , can you help me to make tprot off in edc17c60 , usually my interface make automatically but this file need different patch.

Thanks in advance.

[luismccunha25]

Hi, i have exactly de same with a edc17c60. I read the ecu with pcmtuner and remove adblue and dpf with davinci, then we write it back to the car and after somo time dosent start. We read the file again and trie to tprot, and nothing. Then we tey to write the original file and it dosent start. I think it may be a problem with the pcmtuner its not patching correcly. Can someone help? Thanks all

[alonedark]

Tontos a tutty plain

[DimaxXx]

any news???

[dtip]

any news???

news on what? Just open read file in any hex editor and do this:
912060 (https://robaizkine.com/edc17c10-and-edc17c60-tuning-protection-removal-tool/)

It is enough for tprot. You have this free tprot removal tool (https://robaizkine.com/edc17c10-and-edc17c60-tuning-protection-removal-tool/) but if you can't do it you are in wrong job, start with something more basic like edc15, edc16...

[DimaxXx]

news on what? Just open read file in any hex editor and do this:
912060

It is enough for tprot. If you can't do it you are in wrong job, start with something more basic like edc15, edc16...

I just wanted to know if the guy had solved the problem

[br556hre]

news on what? Just open read file in any hex editor and do this:
912060

It is enough for tprot....

Is after 2d0f0000df320480 zeroing 5 bytes CRC renewal required?
What if you have more search results is it the first or last one?
Thanks!

[qni666]

remove trpot manual and fix this problem