Immo off MED7.5.11 via OBD

[Code Breaker]

Hi all please could you tell me, if, its possible to Immo off on MED7.5.11 via OBD?

[Leeetoyo]

Dont know about xprog and bdm100 but your other tools wont do it by obd.

You need the eprom dump to make immo off, the best way should be by bench read/write with ktmbench, ktag, flex..

[Code Breaker]

OK, I removed EEPROM, read it, immo off'd, can someone confirm immo is off please?

Question the FIN and Immo Num that shows can this info be changed to show something totally different info which can then be used to personalise/id your ecu? then written back to the EEPROM? will it affect anything?

[Code Breaker]

Ok so after what I thought was immo removed, the dash immobiliser light goes out at first, but when you start car, it starts to flash and car not starting.

I have tried this on 3 different EEPROM's all same, what am I doing wrong oh great ones?

[Leeetoyo]

immo is off in your eprom dump

[Leeetoyo]

check for dtc's present in ecu or other modules

[tunstyle]

Hi, I/O Terminal read this eeprom to the Obd port

[Code Breaker]

Hi, sorry, I have no idea what that means, I removed EEPROM and read/write using X-Prog-M. I removed Immo using Vag Calc v2

[Code Breaker]

Attached is VCDS DTC's read

Also attached are three EEPROM Readings with Immo off that are not working in each of the three ECU's, same problem.

[baltazar3]

VIN : WAUZZZ8Z43N012953
PIN : 7354
Immo status : OFF
P.S.
Post pic of ECU sticker

[Code Breaker]

Sticker attached ....

[baltazar3]

Post ORI EEPROM

[Code Breaker]

Original plus, immo off files attached as requested

[baltazar3]

Original plus, immo off files for each of three ECU's attached as requested
Here is requested file ....write and enjoy...pm

[Code Breaker]

Can someone tell me where I can download (or pm me it please) Vag Calc for MED7.5.11 that also 'calculates Checksum' please ? Vag Calc v2 doesn't do it therefore immo off doesn't work.