eliasole
12th January, 2021, 03:35 PM
Hi ,the story is ,about a month ago add a key on a 2009 A5 Audi , before add key make back up flash and eeprom 95320 ,vvdi prog.
Put back in car and no ignition at all. After a while ignition came on without do anything and try to add key with vvdi2,in process stoped and do nothing.
So virgin keys and wrote again.
For about a month all ok ,until customer tell me that dont have ignition ,wrote ori dumps back rewrite keys but after some days problem is the same with fault when
i get ignition back. eeprom error in comfort modul and steering lock symbol on dash.
I bought a used one and i ask, what is the procedure to add it to the car without the use of old files?
Put back in car and no ignition at all. After a while ignition came on without do anything and try to add key with vvdi2,in process stoped and do nothing.
So virgin keys and wrote again.
For about a month all ok ,until customer tell me that dont have ignition ,wrote ori dumps back rewrite keys but after some days problem is the same with fault when
i get ignition back. eeprom error in comfort modul and steering lock symbol on dash.
I bought a used one and i ask, what is the procedure to add it to the car without the use of old files?