PDA

View Full Version : 2020 Honda Civic TBA A060 H850 crash question


swiderek
12th January, 2021, 05:30 PM
I did A 2019 Civic with the same module, butt hat one had FF everywhere apart from the line 2C0

This 2020 is all the same but instead of FF has EB, I thought maybe I read it wrong, but no, read the same with CPT all the time.

So I leave the 2C0 line alone and FF everything else in the entire file. I have the crash off, did the seatweight reset and light is OFF but I cannot do the ABS initialization. I have no fault codes other than C0051-54 which should go off after ABS initialization.

The only thing I've noticed on live data is that the G sensor shows 1.76 where it should be between -0.2 - 0.2.

From my understanding the G sensor is in the SRS module. Could it be faulty rendering the module damaged and stopping me from finishing the ABS initialization?

Or did I clear this file wrong causing the issue?
long beach
12th January, 2021, 06:13 PM
is cpt problem my friend I did 3 with the same problem
vertyk
12th January, 2021, 07:45 PM
try this.................... abs initialization--first calibrate tpms...........next calibrate all sensors procedure
superjet
13th January, 2021, 08:53 AM
Check this one,report.
pm
AB4S
13th January, 2021, 11:27 AM
You need to post your crash file on CPT forum and they will make new clear file for you. They updated CPT RH850 instead of FF its EB now, just more work and more time wasted in my opinion as their "support" is next to none.
Zaveruha
13th January, 2021, 11:38 AM
In this case FF and EB don't matter. You should clear only CRASH but not all damp to FF.
swiderek
13th January, 2021, 04:28 PM
Appreciate all the information guys. I will test the provided files and let all you know if they work.
swiderek
13th January, 2021, 10:31 PM
try this.................... abs initialization--first calibrate tpms...........next calibrate all sensors procedure

With your file SRS is off too, just like with my FF job. I have issues with TPMS, cannot reset the system and I think that's what's stopping me from calibrating the ABS. Customer is taking the car so this case is closed.

Thank you!
superjet
16th January, 2021, 03:54 PM
did you sloved?
swiderek
2nd February, 2021, 05:41 PM
did you sloved?

I didn't but dealer did. Once they solved issue with TPMS they were able to calibrate the ABS and all lights went off.
Vladimir.zheurov
3rd February, 2021, 07:32 AM
On this car, ABS sensors calibration is only possible using the HDS. I tried with other tool, but I couldn't do it.
swiderek
3rd February, 2021, 10:24 PM
On this car, ABS sensors calibration is only possible using the HDS. I tried with other tool, but I couldn't do it.

Correct. We have the HDS, but issue with tpms module was blocking us from doing the calibration.