EDC17CP14 need checksum correction.

[evisdaci]

Please can anyone help me with Checksum Correction for this ecu, VW Passat 2.0TDI, EDC17CP14

[pena]

Please can anyone help me with Checksum Correction for this ecu, VW Passat 2.0TDI, EDC17CP14


This is your file with correct cheksum.

[evisdaci]

Not working my fried

[Team dz]

UPLOAD FILE ORIGNAL

[evisdaci]

I have upload original file

[marko6jpt]

here your file

tnx+rep 4 pass

777075

[evisdaci]

Pass please

[bobolin4o]

Please can anyone help me with Checksum Correction for this ecu, VW Passat 2.0TDI, EDC17CP14

First of all - your file is not original!
It is DPF and Immo off...
Why you don't tell us the truth?!?

[evisdaci]

I dont know about that because i didn't do that. Maybe someone have done that

[bobolin4o]

And what exactly you have to do? Tell us the all story...

[evisdaci]

I want to make immo off, because car is blocked from immo. In dash I have SAFE. Somebody have done for me immo off and checksum correction in eeprom and now car start OK but i have this error code P160A in ECU. Below are the original dumps that I have read for the first time when the car come here. And also I will post the new eeprom which is IMMO OFF but error P160A.

So I need immo off and no error code

[bobolin4o]

https://www.digital-kaos.co.uk/forums/showthread.php/872712-VW-Passat-EDC17CP14-need-immo-off
So as i see, exactly you do that...

Test my file...
Leave the eeprom as is.

BTW, which tool you use?

[evisdaci]

I use Galleto for that. So leave original eeprom or new Eeprom immo off ?

[bobolin4o]

New eeprom immo off, of course!
After all, with it you don't have "SAFE" on the dash i suppose...

[evisdaci]

Can't write I have this error file checksum not suported. The device not let me to write the dump file. I can not understand why it can not be writed

[bobolin4o]

give me your skype in private... want to see through teamviewer

PS:
So... for all, who read this thread...
Never, ever... make any checksum with WinOls on EDC16 and EDC17...
The tool will correct it, while writing the new file!

[SoftDev]

give me your skype in private... want to see through teamviewer

PS:
So... for all, who read this thread...
Never, ever... make any checksum with WinOls on EDC16 and EDC17...
The tool will correct it, while writing the new file!

It's good that you went to explain, but tell us what was the problem? I am confused. All modifications that I did had automatically calculated checksums from the WinOls (All CS ok) and I had no problems...

[bobolin4o]

It's good that you went to explain, but tell us what was the problem? I am confused. All modifications that I did had automatically calculated checksums from the WinOls (All CS ok) and I had no problems...

The problem was, that the Galletto and Ktag (both clone, in boot mode) tells, that can't calculate the checksum of his file and didn't let him to flash.
Just to tell you, that my Ols is genuine, with latest update and have this checksum plugin...
Same file, with restored checkum blocks to original - job done.

[SoftDev]

I'm sorry but I'm already totally confused.


You first say - the tool will correct it, while writing the new file!
Then - Galletto and Ktag can't calculate the checksum of his file and didn't let him to flash.


And another one:


Never, ever... make any checksum with WinOls on EDC16 and EDC17...
Then - I made same file with WinOls with restored checkum blocks to original - job done.




As you say above - Why you don't tell us the truth?!? :) :) :)

[Carli]

I'm sorry but I'm already totally confused.


You first say - the tool will correct it, while writing the new file!
Then - Galletto and Ktag can't calculate the checksum of his file and didn't let him to flash.

And another one:


Never, ever... make any checksum with WinOls on EDC16 and EDC17...
Then - I made same file with WinOls with restored checkum blocks to original - job done.




As you say above - Why you don't tell us the truth?!? :) :) :)


Almost all tools make checksum (KTAG,KESS,Magpro,FLEX, Galleto) but there is also some bugs sometimes and tool doesnt make cks ( I had situation with flex ON psa edc17c10/60, it doesnt make cks). There is Ioterminal that reads FULL by obd and that tool doesnt make cks. I use ktag org with years and never had problem with cks.

About winols. I use Winols for editing files and usually i calculate checksum and never have problem (EDC15,16,17, Siemens Sid... Denso ) and its okey :)
like i said there is some ecus or software versions that tools doesnt calculate checksum good, but u can do it by winols

[evisdaci]

Many thanks to BOBOLIN4O, hi solve my problem and help me so much. Now everything is OK.

[bobolin4o]

I'm sorry but I'm already totally confused.
As you say above - Why you don't tell us the truth?!? :) :) :)

I tell you the truth! You call me a liar?
With his file, with corrected checksum with the last winols - Galletto tells, that can calculate the ~~~~ing checksum and don't let to flash!
This file was already made with 2.24 and the checksum was corrected, but the last winols said, that is not correct... and correct it...
Non of the two files was accepted from Galletto.
Same file, with restored checksum blocks to original (original file, extracted from SGO) - Galleto flash it!
Is it clear now?

[SoftDev]

Yes it is clear now. Thank you.