NEED CODE CAR AUDIO SEAT MP3 BLAUPUNKT SEZ1Z2H553430 6J0 035 153 B ULT

[newgeniehex]

HELLO
Some one can find the code please
nyo4 don't hve this algo
eeprom 95128
Thank in advance
best regard

[Zann]

Read NEC processor for code.

[catalinosonesti]

Hi
Read also NEC to get full code .
Best regrads

[newgeniehex]

many thank
i have jtag by smok
have you good pinout for connectionwhit jtag?
thank in advance

[Zann]

many thank
i have jtag by smok
have you pinout for connection?
thank in advance
Search this forum, there is everything you need.

[newgeniehex]

i need also good pinout for read by jtag

[catalinosonesti]

Hi
Can this pinout help you .
Best regrads

[newgeniehex]

Hi
Can this pinout help you .
Best regrads
many thank
but your picture is very small
have you a good picture
thank in advance

[catalinosonesti]

many thank
but your picture is very small
have you a good picture
thank in advance


Hi
here you have all pinout

[newgeniehex]

HELLO
many thank but i have no communication whit nec poocessor
the pinout PDX it is the pin 1or 2 of the cable jtag???
I have test the pin 1 (white)or 2(orange) of jtag cable i have not communication
thank in advance
i put the picture

[Zann]

HELLO
many thank but i have no communication whit nec poocessor
the pinout PDX it is the pin 1or 2 of the cable jtag???
I have test the pin 1 (white)or 2(orange) of jtag cable i have not communication
thank in advance
i put the picture
I have never used JTAG for reading NEC, only USB-To-Serial adapter.

[catalinosonesti]

HELLO
many thank but i have no communication whit nec poocessor
the pinout PDX it is the pin 1or 2 of the cable jtag???
I have test the pin 1 (white)or 2(orange) of jtag cable i have not communication
thank in advance
i put the picture
Hello
Here on DK allmost all members use this simple reader V850 ,and simple program to read NEC .PDX you must put a rezistance 12k to 12v on radio
I send this to you to make a idea https://www.digital-kaos.co.uk/forums/showthread.php/734689-programator-V850-NEC-RCD310-RCD510?highlight=rcd510+i%26%23351%3Blemci
Best Regrads
Catalin

[newgeniehex]

HELLO
if i undestand i must to make 12v whit resistor 12K to PDX
lokk my picture it is ok?

[Naughty child]

HELLO
many thank but i have no communication whit nec poocessor
the pinout PDX it is the pin 1or 2 of the cable jtag???
I have test the pin 1 (white)or 2(orange) of jtag cable i have not communication
thank in advance
i put the picture


Did you know that UART and SPI are different access points? Your programmer is set to SPI

[newgeniehex]

I tested the 2 modes UART and SPI I can't communicate
I don't have a 12K resistanceI will do the tests on Monday after buying resistors
cordially

[catalinosonesti]

I tested the 2 modes UART and SPI I can't communicate
I don't have a 12K resistanceI will do the tests on Monday after buying resistors
cordially
Hi
Dont forget to power on the radio to source 12V max 3A , but NOT START THE RADIO ,NOT TURN ON.
Regrads

[newgeniehex]

I added a resistor of 12k connector on 12V
I put the 12V ground to the JTAG ground
I can't read the NEC processor
I tested all the possible 3v and 5v modes and the SPI and UART mode
and all the possible frequency
I also plugged in the power supply of the station and I still have the same problem?
maybe i must ti use ORANGE programmer???
thank in advance
best regard