Reading problems KTAG / BDM EDC16 A6 4F

[turbo16v]

hi Guys!
I have problems reading from an EDC16cp34 via bdm / ktag
I want to clone this ecu because I have problems with my original control unit. Up until now I have been able to read and write every edc16 with BDM100 / Ktag Clone. The ECU comes from an A6 4F 2.7TDI from 2007
Bosch 0281014384
I can read and write my A6 4F 3.0 TDI Bj 2005 Bosch 0281012270 with BDM / Ktag without problems
What is the difference between the 2.7 and 3.0 ECU
thanks in advance

[Tawe]

Which protocol do you choose? Check MPC and Flash version in your ECU, and check in Protocol, should be the same.

[turbo16v]

Hi there
At ktag, the hardware is missing from the list
I have HW4
so far i have made the experience that everything that works with bdm100 also works with KTAG
what is the Bosch optican 101/201 for?779780

what is the difference between this adapter ???



Edit:with the Galletto V54 I have now been able to read and write to the control unit.
why BDM100 and Ktag don't work is a mystery to me