View Full Version : Sprinter edc16cp31 dpf off problems
Leeetoyo
26th January, 2021, 07:41 PM
hi guys,
im looking for manual solution for dpf off for a mercedes sprinter 518 with edc16cp31 2007.
i tried a few automated solutions but it keeps regenerating and smoking white alot.
im not sure if any attemps have been made to mod file before me
this is the read as it came to me (dpf empty already).
thanks
peechie
26th January, 2021, 07:45 PM
Try this..............
Leeetoyo
26th January, 2021, 08:31 PM
Try this..............
No joy... still regenerating and smoking
Leeetoyo
26th January, 2021, 08:35 PM
I need tested solution please
teerak2uk
26th January, 2021, 10:58 PM
Have you reset dpf before and after write?
Sent from my Redmi Note 7 Pro using Tapatalk
teerak2uk
26th January, 2021, 10:59 PM
What fault codes if any with original file in ecu
Sent from my Redmi Note 7 Pro using Tapatalk
teerak2uk
26th January, 2021, 11:42 PM
maybe bdm read is needed
Leeetoyo
26th January, 2021, 11:51 PM
Don’t know if it had dtc’s as first tried dpf off solutions, i would have to flash ori file back and scan it
Leeetoyo
26th January, 2021, 11:53 PM
Didn’t reset dpf reset first btw, that could possibly help
stanislav georgiev
27th January, 2021, 08:00 AM
In Mercedes, resetting is not necessary. You probably have a problem with the injectors.
Leeetoyo
27th January, 2021, 08:04 AM
No it’s regenerating as it’s smokes and idles a little ruff and after 1min it’s all normale.
After a wile it can start regenerating again with lots of smoke.
teerak2uk
27th January, 2021, 09:03 AM
No it’s regenerating as it’s smokes and idles a little ruff and after 1min it’s all normale.
After a wile it can start regenerating again with lots of smoke.Reset or bdm read needed
Sent from my Redmi Note 7 Pro using Tapatalk
orange123
27th January, 2021, 09:09 AM
your file is already dpf off, did you disconnect the temp sensors and the dpf pressure sensor?
Leeetoyo
27th January, 2021, 09:10 AM
your file is already dpf off, did you disconnect the temp sensors and the dpf pressure sensor?
No all is still connected
mahani123
27th January, 2021, 09:16 AM
mercedes w906_dpf_off
Leeetoyo
27th January, 2021, 10:19 AM
mercedes w906_dpf_off
Is this tested solution?
bobolin4o
27th January, 2021, 10:23 AM
After you test it - will be.
Regards!
ecuprogramer
27th January, 2021, 11:11 AM
Leeetoyo (https://www.digital-kaos.co.uk/forums/member.php/642237-Leeetoyo)
Hello everyone, I looked at your file for you DPF on EGR off TVA on FLAPS on he made you a working DPF off solution now everything will be ok
My solution tested and working
rep+thnx button press
Leeetoyo
27th January, 2021, 03:23 PM
After you test it - will be.
Regards!
Your probably right..
Leeetoyo
27th January, 2021, 03:25 PM
Leeetoyo (https://www.digital-kaos.co.uk/forums/member.php/642237-Leeetoyo)
Hello everyone, I looked at your file for you DPF on EGR off TVA on FLAPS on he made you a working DPF off solution now everything will be ok
My solution tested and working
rep+thnx button press
Thanks, I’ll give you rep when I’m on laptop.
orange123
27th January, 2021, 04:13 PM
disconnect it and it will work
Leeetoyo
28th January, 2021, 05:14 PM
testing it with solution from fellow member, so far so good..
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.