PDA

View Full Version : help read mcu 2j74y



jjas40
24th January, 2010, 09:20 PM
hi
I need help with upa and motorola 68hc908az60
2j74y

I plug in as page 16 of the upa help but I can not read.
device not responds
The UPA is fine.
the mcu is fine.
I am warm but does not respond to the mcu.
someone knows how to read the mcu?
greetings

szogun0
24th January, 2010, 10:16 PM
Are You sure, that MCU is fine?
UPA read it well.
Is this from EZS?
Maybe secured MCU?

PremierD
24th January, 2010, 10:24 PM
hi
I need help with upa and motorola 68hc908az60
2j74y

I plug in as page 16 of the upa help but I can not read.
device not responds
The UPA is fine.
the mcu is fine.
I am warm but does not respond to the mcu.
someone knows how to read the mcu?
greetings

Never had any success reading with UPA ... ETL's the one you want mate .....To do with security bits .....

jjas40
24th January, 2010, 11:03 PM
hi
yes upa read good with other devices.
the mcu is uch renault espace year 2001.

I am not sure of the proper functioning of the mcu.
uch heat the work.
uch with the cold does not work.
I give you heat the mcu and the device does not detect upa
not if I do something wrong.
as I read the mcu?
greetings

PremierD
24th January, 2010, 11:10 PM
Are You sure, that MCU is fine?
UPA read it well.
Is this from EZS?
Maybe secured MCU?

Yes mate ... 908az60 ... is secured .......

jjas40
24th January, 2010, 11:16 PM
hi
What solutions can I have?
bits of security.
What do you mean?
I have checked the box.
greetings

Jose19
25th January, 2010, 12:45 AM
hi
What solutions can I have?
bits of security.
What do you mean?
I have checked the box.
greetings
If you use UPA, you need to know security bytes.
With ETL is the best way

kareszka
25th January, 2010, 06:58 AM
hi
I need help with upa and motorola 68hc908az60
2j74y

I plug in as page 16 of the upa help but I can not read.
device not responds
The UPA is fine.
the mcu is fine.
I am warm but does not respond to the mcu.
someone knows how to read the mcu?
greetings
Hi!
Lift or cut reset,irq and pta0 pin.And try this helps possibly.
$00-$00-$00-$00-$00-$00-$00-$00=MC68HC908AZ60(Default)
$10-$0C-$10-$09-$10-$06-$10-$03=MC68HC908AZ60(2J74Y)
$11-$11-$11-$11-$11-$11-$11-$11=MC68HC908AZ60(2J74Y)
$22-$22-$22-$22-$22-$22-$22-$22=MC68HC908AZ60(2J74Y)
$46-$FF-$8E-$00-$49-$E2-$8E-$00=MC68HC908AZ60(2J74Y)
$49-$50-$59-$BB-$0D-$02-$08-$82=MC68HC908AZ60(2J74Y)
$86-$C9-$86-$C9-$86-$C9-$86-$C9=MC68HC908AZ60(2J74Y)
$AA-$08-$AA-$08-$A9-$94-$AA-$08=MC68HC908AZ60(2J74Y)
$BC-$B8-$C8-$06-$C8-$06-$C8-$06=MC68HC908AZ60(2J74Y)
$E5-$78-$EE-$F9-$EE-$F9-$EE-$F9=MC68HC908AZ60(2J74Y)
$E5-$DD-$E4-$0A-$67-$2B-$E5-$DD=MC68HC908AZ60(2J74Y)
$E5-$E3-$E4-$10-$67-$2B-$E5-$E3=MC68HC908AZ60(2J74Y)
$F8-$F2-$F9-$F3-$F9-$F5-$F9-$F7=MC68HC908AZ60(2J74Y)
$F9-$F1-$F9-$F4-$F9-$F7-$F9-$FA=MC68HC908AZ60(2J74Y)
$FF-$FF-$FF-$FF-$FF-$FF-$FF-$FF=MC68HC908AZ60A(Default)

jjas40
25th January, 2010, 11:50 AM
hi
equal. the MCU does not respond
ETL?
I do not know
anyone know tell me that is ETL.
I need to read the mcu to copy it to another uch
greetings and thanks

jimthejock
25th January, 2010, 11:59 AM
go and look on here www.etlweb.com/

kareszka
25th January, 2010, 02:55 PM
hi
equal. the MCU does not respond
ETL?
I do not know
anyone know tell me that is ETL.
I need to read the mcu to copy it to another uch
greetings and thanksHello


Lift/Cut IRQ, PTA0, and reset pins, solder the wires from the programmer direct to MCU pins
select 68hc908az60 from the device list
Click auto baud button, if this action fail you have connections problem but in some chips
auto baud may not work, in this case you have to set baud rate manual
Set Baud rate manual (correct baud rate your can calculate according device datasheet - monitor section)
if no success increase/decrease baud rate with 10 or more

Regards

nazz2
25th January, 2010, 08:49 PM
Sorry to butin but im having problem locating an adapter to read fiat brava immo chip ,which is MC68HC908AZ32 mask J66D ,any idea guys about etl and compatibility with the above ic?,where can get an adapter for this 64 leg ic.

im usning UPA ,but its not in its list,plus dont have the adapter to go with my soft,thanx in advance.

PremierD
25th January, 2010, 08:53 PM
Sorry to butin but im having problem locating an adapter to read fiat brava im*o chip ,which is MC68HC908AZ32 mask J66D ,any idea guys about etl and compatibility with the above ic?,where can get an adapter for this 64 leg ic.

im usning UPA ,but its not in its list,plus dont have the adapter to go with my soft,thanx in advance.

It reads inncircut with UPA mate ..... you don't need an adapter ....

nazz2
25th January, 2010, 08:56 PM
Thanx premier d ,would the digramm be in the upa help fine?im going to check again i dont know how i missed it,thnx

PremierD
25th January, 2010, 09:14 PM
Thanx premier d ,would the digramm be in the upa help fine?im going to check again i dont know how i missed it,thnx

http://www.digital-kaos.co.uk/forums/f115/start-err-r-sprinter-72253/index2.html

The Rar file shows you it connected ... No need to lift any pins ... Press auto baud .. Then read mate ....And yes there in the help file ...

nazz2
25th January, 2010, 09:19 PM
hi
Just found it on p12 on the help file,however never done one in cercuit before!,according to the diagramm,is that mean that i have to have an open end serial lead,and where it says P1 i have to solder to ic P1 and then to pin one of the serial lead?.

the one in the diagramm is the qpf package the one in the immo is a big ic,plcc ,i think ! is the diagramm still the same for both packages,thnx m8