Iveco edc17c49 0281030088 cloning / immo off

[atd]

Hello,
I have to clone or make immo off in:
Iveco daily 0281030088 edc17c49.
The original ecu starts the car but appears dtc egr temp sensor and ecu doesn't see the temperature of egr in measurements.
When I plug in another ecu with the same numbers the temperature is ok but i have to adapt it to car or make immo off.
When i make cloning 1:1 the error still is present so there's something wrong in ori backup.
I think that eeprom seems to be corrupted (no data in first half part).
Is anybody able to advice how to make immo off or which bytes copy to donor ecu?
Car is far away...

[vladanr]

781116 try this ,you must correct check sum

[atd]

Thank you but unfortunately this solution i've tried previously and it doesn't work in this type of edc17c49.

[greyg]

MM flex has always had issues with Iveco eep. For this 128k files.


You have to manually transfer the immo codes to the new edc. Better method - reset the data stored in the original one. Just need to correct the eep syntax.


You can also use immo emulator. I do not share my work on switching off.

[atd]

The problem is solved. When somebody will have the same problem with egr temp sensor i can help.
Thank you for inputs guys.