2006 mercedes Benz w211 ELV emulator

[srt8]

Hello everyone I have a elv issue with this unit. I put elv emulator, the key turns but have no atart ok from ELV in the Eis. The original elv has issues and they don’t want to buy it. What could be the issue? Is it because maybe this elv emulator has issues????? It opens the cluster

[tirnanic malisa]

Frend, are you saying he's giving contact but not crank

[srt8]

Yes, it opens the cluster but no cank

[tirnanic malisa]

if you have vvdi mb or fvdi hook up to the car and see if there is an exit 50 if there must be a problem in something else e.g. fuse,regards

[brend]

Yes, it opens the cluster but no cank


What about autorization status in ezs and ecu?
Are you cheked this?

[srt8]

Hello, ME and Eis authorizes ok. Only elv is NO. The rest are ok. Fuses and B+ and Neg are there

[LEORNARD NKATA]

Hello everyone I have a elv issue with this unit. I put elv emulator, the key turns but have no atart ok from ELV in the Eis. The original elv has issues and they don’t want to buy it. What could be the issue? Is it because maybe this elv emulator has issues????? It opens the cluster

hello friend if the car is turning on you might be having connection issues the car has 4 wires on elv and the emulator has 3wires is that right?

[Electro 1]

Hi friend do as post 4 if problem persist. From what I gather w211 has central gateway module. U might want to check that. Also which emulator are u using?

[georgievgoro]

Hello, the problem is in the emulator. Reset the ELV to factory condition and the car will work. You can use another ELV, reset it and it will work again.

[srt8]

hello friend if the car is turning on you might be having connection issues the car has 4 wires on elv and the emulator has 3wires is that right?
hi. The emulator is 3 wires and the car is 4. I have used 2 different emulators, different types.

[srt8]

Hi friend do as post 4 if problem persist. From what I gather w211 has central gateway module. U might want to check that. Also which emulator are u using?
Hi I am using China and one from euro, Poland, all 3 wires. It opens the dash but no start in the Eis.

[srt8]

Hello, the problem is in the emulator. Reset the ELV to factory condition and the car will work. You can use another ELV, reset it and it will work again.
How do you reset the emulator for w211 cars? Would vvdi bga mb do it

[srt8]

Hi friend do as post 4 if problem persist. From what I gather w211 has central gateway module. U might want to check that. Also which emulator are u using?
Yes it has the SGM. it is connected. With the emulator it turns the key and dash opens but won’t start

[Electro 1]

Search for goldcar emulators those work. Or alternatively virgin existing elv or used elv. It will self adapt when the key is inserted into the ezs.

[srt8]

Search for goldcar emulators those work. Or alternatively virgin existing elv or used elv. It will self adapt when the key is inserted into the ezs.
Thank you, existing elv? Without renewing will work?

[srt8]

Search for goldcar emulators those work. Or alternatively virgin existing elv or used elv. It will self adapt when the key is inserted into the ezs.
I actually had an issue with the goldcar mbz and one bmw emulators. I am using euro and China they work fine except this car. Very strange issue. I even gotten another used eis and coded, again, opens the dash but won't crank