View Full Version : Vw golf 5 1.9 tdi limp mode delete
bugarcek
3rd February, 2021, 06:53 PM
Hi
Can be limp mode turned off for this dtc: p0238
I tried with dtc off but not enough.
socha1997
3rd February, 2021, 07:12 PM
You should repair this ;)
Possible Symptoms
Malfunction Indicator Lamp (MIL) active
Possible Causes
Wiring/Connector(s) from/to Manifold Pressure/Boost Sensor (G31) faulty
Manifold Pressure/Boost Sensor (G31) faulty
Possible Solutions
Check Wiring/Connector(s) from/to Manifold Pressure/Boost Sensor (G31)
Check Manifold Pressure/Boost Sensor (G31)
chrisimerk
3rd February, 2021, 07:17 PM
Hi
Can be limp mode turned off for this dtc: p0238
I tried with dtc off but not enough.
Fix the problem! Software solutions isn't always your savour lol
bugarcek
3rd February, 2021, 07:22 PM
I know this... I would not ask for this. But engine is moved into golf 2. If someone can turn this off I would be just happy.
Newmotors
3rd February, 2021, 07:49 PM
Thanks + reported pass in pm
Junkyard Dog
3rd February, 2021, 07:56 PM
if you want try this and report back... pass you have in pm
bugarcek
4th February, 2021, 01:11 PM
not ok...Stil throws into limp mode
Newmotors
4th February, 2021, 01:16 PM
Most of the time just removing the DTC does not resolve the lame mode
motor25
4th February, 2021, 08:15 PM
Your ecu cant see actual portion of air from turbo, to calculate correctly how much fuel needs to be supplied to the cylinders))) ECU does not see the signal from the pressure sensor, or rather he sees it is outside the norm. You can delete DTC and limp, but this will not solve the problem, the car will not go) Best way SWAP 1.9TDI engine to golf2 or Transpoter 2 and install mechanical fuel pump and turbine without variable metric, but if you want correct work electric pump and turbine, you must restore this setting))
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.