Klaudas1331
3rd February, 2021, 11:09 PM
Hello,
so today I tried reading A6 edc15p+ with Kess V2 Clone red pcb europe version, read was successful no errors or anything, modified the file, tried writing it back and bricked the ecu, car did not start, tried writing back the original file, the car also didn't start.
Then a friend of mine helped me with sending another original file for this ecu and sent 2 files with different ECU hardware and software numbers.
Wrote the original file that my friend have sent to me, the car started, no errors or anything, then after that I wrote a file with different HW and SW numbers, the car started, felt the increase in power, but the only problem is that the glow plug light is blinking, vcds shows error P0605 and another fault code which I didn't catch, but something about internal error or something.
I'm assuming that it has checksum errors when writing and also I'm thinking maybe a DTC delete would fix the blinking glow plug light, need ideas and suggestions how to fix this problem, thanks in advance.
I'm using K-Suite 2.23
Attaching original ECU read (a6_1.9tdi_96kw.rar)
and attaching original file readed not by me (Ori file.rar)
HARDWARE: 0281011214
SOFTWARE: 1037367399
UPG. SW: 038906019LL 4912
SW Ver.: 39S02050
ENGINE: 1.9l R4 EDC SG
so today I tried reading A6 edc15p+ with Kess V2 Clone red pcb europe version, read was successful no errors or anything, modified the file, tried writing it back and bricked the ecu, car did not start, tried writing back the original file, the car also didn't start.
Then a friend of mine helped me with sending another original file for this ecu and sent 2 files with different ECU hardware and software numbers.
Wrote the original file that my friend have sent to me, the car started, no errors or anything, then after that I wrote a file with different HW and SW numbers, the car started, felt the increase in power, but the only problem is that the glow plug light is blinking, vcds shows error P0605 and another fault code which I didn't catch, but something about internal error or something.
I'm assuming that it has checksum errors when writing and also I'm thinking maybe a DTC delete would fix the blinking glow plug light, need ideas and suggestions how to fix this problem, thanks in advance.
I'm using K-Suite 2.23
Attaching original ECU read (a6_1.9tdi_96kw.rar)
and attaching original file readed not by me (Ori file.rar)
HARDWARE: 0281011214
SOFTWARE: 1037367399
UPG. SW: 038906019LL 4912
SW Ver.: 39S02050
ENGINE: 1.9l R4 EDC SG