OP-COM Software Free4All

[fantomel]

As i said some time ago, i asked for help and users responded.

Please read before you respond in topic and please provide some feedback.

https://iili.io/fToxkB.md.jpg

If you are curious open and see and you will not be sorry :) I always keep my word.

And a little bit of help to see if your inteface is good or not.

https://i.postimg.cc/dtpzJwXs/Check-FAKE-PIC.png


+ I added down PDF's for CH-CAN modification and also if you like printed boards the project for it.

Enjoy
:)

Fantomel

[fantomel]

And i forgot to add the good schematic of op-com revision B interface ( beware U5 and U6 are inversed).

[pepper]

Good work fantomel
the links in the text file dont seem to be there any chance of reload?
thanks

[fantomel]

Mate , if you read the txt i said if the first link does not work or asks of $ pass to the next one. First share is dead , 2,3,4 and mirrored.to are all working.

[Jatu88]

nice buddy it work´s perfekt :) hope you add maybe german OP com than you get a kiss from me :P

[oennop]

Thanks a lot for your work. i am so happy!!!! :tomato:

[steva.vojnovic]

Update : I have resolved problem , my Firefox blocked access to these files.



At first THANKS for this work you shared with us for free.
I have a problem to access PDF you shared. First is OK , but these three I cant access.


CH-CAN CONNECT SCHEMATIC.pdf (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=783552&d=1612641160) (8.5 KB, 68 views)
CH-CAN PCB_TO PRINT.pdf (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=783553&d=1612641160) (21.5 KB, 47 views)
CH-CAN PLAN PCB.pdf (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=783554&d=1612641160) (12.2 KB, 49 views)

[malacca]

Is the link to the recommended hardware from result.txt still relevant/up to date ?

[omarzoro]

THANKS for this work you shared with us for free.

[Bogdan3l]

Hi fantomel,

The op-com schematic is only 385x272px.

If you have a bigger one, can you please post it?

Thanks so much!

;)

[volodin69]

Is what we get. Try measuring your pcb traces and compare with the picture. You will figgure it out.

[Bogdan3l]

Oh, I didn't know that, thanks!

[fantomel]

As requested, sorry guys but it was not my fault that it got .... small :)

[Bogdan3l]

You're awesome, thanks!

[vladimius]

you can give a link to download the program op com free4all?

[ewq]

read the post #1

[Jatu88]

Can i share this Software for free? Maybe you will post a german version of op com then you get a kuddle and a biiiiig kiss from german guy :D

[MyRiot64]

Fantomel Can I use your guide and provide a link to your OPCOM files in one Polish forum ??

[fantomel]

The files i put are always free so you can put them wherever you want .... just free :)

[Mexanic]

Dear fantomel. Does ch-can support abs and esp blocks insignia 2012?

[Mario6]

Dear fantomel. Does ch-can support abs and esp blocks insignia 2012?

In newer cars CH-CAN modules are:
Adam- EPS
ZafiraC-IMU, SAS, SADS
Insignia- IMU, SAS, SADS
Mokka -IMU , SAS,
Cascada-IMU,SAS, SADS
ASTRA J- IMU, SAS, SADS,
AMPERA-IMU, SAS,

[ToXiCPoWer]

anyone knows if this can be a good v5 interface?

http://www.ecuvonix.com/obd2-diagnostic-based-pic18f458-opcom-p-4419.html

[ausrastelli]

:rock: Thx

[Dodgyknees]

I am having trouble communicating with the cd400 radio on a 2013 meriva (it won't go into radio mode, stuck in aux unless i put a cd in then plays cd ok, all other controls ok volume, next rack etc) thought give opcom a try see if it can show/do anything.
When I select Radio / Chime control module I get " The file cannot be loaded INSIGNIARADIO ", am I doing some thing wrong? nobody else any where in the internet world seems to be reporting this so suspect its me. I have tried versions 200603a, 191022a,181022a on 2 different pc's win 10 and win 7, all the same.

[johnjohn101]

Thanks for the pictures. After seeing my v5 1.95 version had a good chance of being good I re flashed it and now it’s working like it should.

[djmysia]

Thanks very much

[cetka makedon]

The files i put are always free so you can put them wherever you want .... just free :)
hello pls hellp me I have op-com cina version 1.78, trying your software it happened that the interface shows me as version 1.45 and it doesn't communicate with vehicles anymore, it communicates with a laptop, when I try to upgrade it gives me the following message "bootloader did not respond.....either killed interface,empty pic or new protect" is there a solution or will it end up in the bin? tnx p.s with you update tool recived this : Bootloader Init sendTimeout - is your PIC empty? Not Bootloader?
****

[Mario6]

hello pls hellp me I have op-com cina version 1.78, trying your software it happened that the interface shows me as version 1.45 and it doesn't communicate with vehicles anymore, it communicates with a laptop, when I try to upgrade it gives me the following message "bootloader did not respond.....either killed interface,empty pic or new protect" is there a solution or will it end up in the bin? tnx p.s with you update tool recived this : Bootloader Init sendTimeout - is your PIC empty? Not Bootloader?
****

Your interface has a fake PIC 18F458 and by doing the FW update you just "killed" it.
The easiest way is to buy another interface with a real PIC.

[cetka makedon]

Your interface has a fake PIC 18F458 and by doing the FW update you just "killed" it.
The easiest way is to buy another interface with a real PIC.
not, my interface is real pic chip 18f458

[Mario6]

not, my interface is real pic chip 18f458

I believe the PIC is fake.
But since you say it's real, you can always try to fix it using an external programmer.


If the interface is FW 1.70, FW 1.78, FW 1.99 then it means fake PIC.
Good luck.

[cetka makedon]

I believe the PIC is fake.
But since you say it's real, you can always try to fix it using an external programmer.


If the interface is FW 1.70, FW 1.78, FW 1.99 then it means fake PIC.
Good luck. foto from my interface

[Mario6]

foto from my interface

Just as I thought. Fake PIC 18F458. Note the D5 and C22 items on your PCB.
Good luck.

[j0anita]

Anybody can refer me for a reworked (with CH-CAN tweak) opcom link to buy? Thanks

[Mario6]

Anybody can refer me for a reworked (with CH-CAN tweak) opcom link to buy? Thanks

Translate and try here.
Belarusians boast that their Opcom also supports CH-CAN.

[j0anita]

Thanks. I will have a look if I have any issues with duties because I'm from EU

[Mario6]

Thanks. I will have a look if I have any issues with duties because I'm from EU

Me too.
You can also ask here if their Opcom supports CH-CAN..
SKLAD66

[carfreak1]

Sorry to delete

[iltuorolly]

Thank you Fantomel, very useful info in this jungle of fakes...

[bar72]

thank you for all your hard work fantomel

[death9891]

Hello, what is this capacitor for? C20 that doesn't have to be?

[JayJayRush]

thank you :-)

[death9891]

Welcome to Windows 10 after uninstalling the Ftdi drivers and installing v20830 it's ok but after turning on the computer for the second time I have a newer driver again and it doesn't work how to block assign this driver to opcom?
do you also have v 200603a Prof auto scan of the vehicle does not work?

[Stelaras26]

Translate and try here.
Belarusians boast that their Opcom also supports CH-CAN.

I have this device,i confirm it works on ch-can,tested in astra J

[antonis132]

Welcome to Windows 10 after uninstalling the Ftdi drivers and installing v20830 it's ok but after turning on the computer for the second time I have a newer driver again and it doesn't work how to block assign this driver to opcom?
do you also have v 200603a Prof auto scan of the vehicle does not work?
Hi i can help you with anydesk connection to setting it.

[carfreak1]

Hello, I made the conversion of my interface.
Diagnostic is OK, but I wanted to perform an injectors test.

Engine > Special function >

I receive an error ''Not supported on this version'' or ''Under development'', I don't remember exactly the text.
I have used version 181022a. If I install version 200603a, should it work?

Thank you

[Mario6]

Hello, I made the conversion of my interface.
Diagnostic is OK, but I wanted to perform an injectors test.

Engine > Special function >

I receive an error ''Not supported on this version'' or ''Under development'', I don't remember exactly the text.
I have used version 181022a. If I install version 200603a, should it work?

Thank you

Just install and check.
You can install all versions SW of Fantomel Opcom . They do not interfere with each other.
If there are no special functions related to injectors, look for them in the "live data" of the engine.

[zerrooo]

Thank you FANTOMEL :encouragement:

[pastaguido]

Hello, who can help me!
I have an OP-COM Bulgarian with German software and have tested the software from Fantomel, it worked great, but I had to flash the OP-COM RESTORE.ocfd to make it work. But now I can no longer use the German software, how can the OP-COM reset RESTORE.ocfd?
Please help
excuse my English

[Mario6]

Hello, who can help me!
I have an OP-COM Bulgarian with German software and have tested the software from Fantomel, it worked great, but I had to flash the OP-COM RESTORE.ocfd to make it work. But now I can no longer use the German software, how can the OP-COM reset RESTORE.ocfd?
Please help
excuse my English

You need a "bin" file which will make your Opcom HQ clone again. I think the seller will do it, i.e. the SKLAD 66 store. (they also repair interfaces)
You should have bought a second Chinese Opcom with a real PIC 18F458 instead of reprogramming the Bulgarian one.

[pastaguido]

Thanks for the info, but the Bulgarian has a real PIC 18F458!

[carfreak1]

Tested with different versions and any of them have the function for the injectors.
Corsa D 2009

[Mario6]

Thanks for the info, but the Bulgarian has a real PIC 18F458!

Hi.
I see you didn't understand what I mean.
Your Opcom has a real PIC 18F458 but to make it HQ CLONE again which will work with Opcom 21xxxxx DE you need to reprogram it the same way as you did with OCFlash "RESTORE ocfd". You need the appropriate "BIN HQ CLONE" file for this.
Ask the Bulgarian shop "S66" about it
Good luck.

[pastaguido]

Hi.
I see you didn't understand what I mean.
Your Opcom has a real PIC 18F458 but to make it HQ CLONE again which will work with Opcom 21xxxxx DE you need to reprogram it the same way as you did with OCFlash "RESTORE ocfd". You need the appropriate "BIN HQ CLONE" file for this.
Ask the Bulgarian shop "S66" about it
Good luck.

Thank you Mario6

[pastaguido]

Hello, can someone from the forum provide me with the BIN HQ CLONE file?

[megaSuperUser]

Got a clone interface, looks like the proper one.

Gonna also play around with CH-CAN modification.
Have an or V5 schematic diagram and this other little thing diagram.
But don't have a schematic (or anything else) how to connect them properly.
Can you please share some schematics or smth?

and can't dowload this file - 1.CH-CAN Support(REV.5 ONLY).pdf (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=783551&d=1612641160)
the other links doesn't work.

Anybody?

[nVy]

Everywhere I read that fantomels programs are free and can be shared everywhere. But why can't I find the programs anywhere. Can Someone Send me a dm

[Mario6]

Everywhere I read that fantomels programs are free and can be shared everywhere. But why can't I find the programs anywhere. Can Someone Send me a dm

You're having a hard time finding it.
Check the first page of this topic carefully. You will surely find all SW Opcom from Fantomel.
Current Link is on : YANDEX

https://www.digital-kaos.co.uk/forums/showthread.php/878807-OP-COM-Software-Free4All?highlight=opcom

[dodlof]

With Win7 the opcom works perfectly, in Windows 10 it is almost unusable, very big lags. Does anyone have a similar problem?

[Badounet13]

bonjour , quand j' allume l opcom ca me demande de l' activer je n' ai pas mis de connexion internet est ce normal et ou trouver le code d' activation ?merci

[Mario6]

bonjour , quand j' allume l opcom ca me demande de l' activer je n' ai pas mis de connexion internet est ce normal et ou trouver le code d' activation ?merci


It's the fault of too new drivers. Uninstall the interface and drivers. Then install the drivers that are included in the Fantomel software ("DRIVER"). They cannot be newer than 07/2013.
English, please.

[fantomel]

All FTDi drivers till 2.10 included are good to not get the activation messages. On newer version you will get that, so install for your interfaces older version till 2.10 included.

[RANONC]

Thanks you very much Fantomel

[RANONC]

Hello. I have an opcom purchased on aliexpres that curiously comes with the Fantomel 200603 version with a pendrive that had to be connected to install the program. My Insignia 2014 reads all the modules but I cannot read measurement blocks. I have tried the version of Fantomel 191022 advance but it does not recognize the ecu and the 161001 adv either. The same thing happens to someone. Thank you

[jasepotter89]

You're having a hard time finding it.
Check the first page of this topic carefully. You will surely find all SW Opcom from Fantomel.
Current Link is on : YANDEX

https://www.digital-kaos.co.uk/forums/showthread.php/878807-OP-COM-Software-Free4All?highlight=opcom
Hi, I can see pdfs with pictures of the PCB, but where is the software files to download ocflash & the opcom SW? I can't see them anywhere on that page? thanks in advance.

[Mario6]

Hi, I can see pdfs with pictures of the PCB, but where is the software files to download ocflash & the opcom SW? I can't see them anywhere on that page? thanks in advance.

Download

"yadi..."

"Click a Link and let me know the result". (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=783555&d=1612641160)

[jasepotter89]

Download

"yadi..."

"Click a Link and let me know the result". (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=783555&d=1612641160)

Thank you very much, much appreciated, I couldn't figure out where to find the download link at first then wasn't sure which link was correct/working, thank you for helping me out, hopefully I can get sorted now. all the best, thanks again

[makor1]

Thank you very much Fantomel!