PDA

View Full Version : 2016 ford transit non-pats remote programming??????



alex_r_2001
7th February, 2021, 02:33 AM
Hello today made key for 2016 ford transit that does not have immobilizer fitted from factory... I could not find any way to program remote for keyless entry... I tried alot of programmers and none had option to program rke.... Anybody has this experience before and found a remedy????

Scanners tried

Autel IM608
Autel im508

Londsor ks518

Ford online FJDS and also Forscan

SBB

Will try IDS next time... did not have that laptop with me.

godfathertre
7th February, 2021, 04:14 AM
Key should program automatically
Have you used genuine key why is this vehicle without pats where do you leave.

alex_r_2001
7th February, 2021, 06:10 AM
USA pats not fitted at factory.. 0 keys on memory and starts with metal key... no coil around ignition switch...

Rjautolocksmith
7th February, 2021, 06:11 AM
1. Fasten seatbelt and close all doors
2. Turn the ignition from OFF to RUN 4 times within 3 seconds.
3. Turn the ignition OFF. The system will chime to confirm programming mode.
4. Within 10 seconds, press and hold any button on first keyless remote. The system will chime once to confirm programming.

Manta1600
7th February, 2021, 10:28 AM
Maybe the van doesn't have remote control option - Did you check is the van has locks on both front doors?

rob h
7th February, 2021, 10:41 PM
What engine ecu partnumber is in your car?
Just curious, why there is no immo

Manta1600
7th February, 2021, 11:18 PM
What engine ecu partnumber is in your car?
Just curious, why there is no immo

In some countries is not necessary to have immo chip


I had Toyota 2012 Japan import without chip

autotronixx
8th February, 2021, 06:58 AM
Hello today made key for 2016 ford transit that does not have immobilizer fitted from factory... I could not find any way to program remote for keyless entry... I tried alot of programmers and none had option to program rke.... Anybody has this experience before and found a remedy????

Scanners tried

Autel IM608
Autel im508

Londsor ks518

Ford online FJDS and also Forscan

SBB

Will try IDS next time... did not have that laptop with me.

Im working on 2018 Ford Transit. Im having a similar problem. Long story short , lock and unlock is not working. Ordered a new key from dealer and found no immo on these trucks then used same exact tools you used and ids and could not get he lock and unlock to work. Truck has power door locks so you would think it has to work. I could not even get the chime from the cluster to get it into programming mode. I found out that the truck was registed to amazon prior to new owner. These delivery vehicles get specific software to disaable a lot of featuers(info from ford). I found most up to date files for IPC PCM and BCM flashed and finally got the chime to activate when cycling igntion like the other memeber mentioned. But still no luck in making it the key work for the locking system. Going to attack it this week again. Will update if I find anything.

ray-ray
9th February, 2021, 02:33 AM
rjauto had it wright just follow the what he posted..

alex_r_2001
9th February, 2021, 04:08 PM
Van does have remote made spare key .. original remote works fine... I will try next time I get to van... Thanks

alex_r_2001
9th February, 2021, 04:11 PM
I will try ... and report thanks