VW Polo 2017 3 Button MQB Remote 2G6959752 advice please.

[super jumbe]

Can someone advice please, I need to add new key to VW Polo 2017, this has mechanical key type, I have done Polo 2014 and is there a deferent way to programme the 2017 MQB key any advice very much appreciated thanks in advance.:hmmmm:

[super jumbe]

Forgot to mention I have original key and car starts and ran I just need spare key and I will be using VVDI2 has any one tried programming with VVDI2 tool?

[Manta1600]

Its the same like 2014 until 2018

[fred77]

Prob best tool is VVDI on this

[ghostrider72]

If i good remember you will have to get immo data with OBD Helper. I done 1 but can’t remember was 2017 or 2018. Once you get immo data you can generate XH remote and learn it to the car. After precode off course

[super jumbe]

After 2017 VW, Skoda, Seat can not be done without OBDHELPER, because the instrument cluster is protected, once you have dealer key its 10min job, my OBDHELPER did not connected to server therefore will try again tommorow.

[TERMINATOR1000]

vvdi work fine on MQB Polo V 2014+ , only POLO 6 : 5C HitagPro need immo data from VAG-HELPER + XH key

[Manta1600]

2017 is not 5C

and not need the helper

just read the immo with VVDI2 and program XH key

[super jumbe]

2017 is not 5C

and not need the helper

just read the immo with VVDI2 and program XH key

It is 5C VVDI2 will not read immo tried today mate, all Hitag Pro. NCF29A1 Transponder after 2017.

[TERMINATOR1000]

Simply say "polo 6" , you need helper , if helper don't work for 5C key you can't do this job !
i used "helper" one day ago on MQB car , work fine ...

[super jumbe]

Simply say "polo 6" , you need helper , if helper don't work for 5C key you can't do this job !
i used "helper" one day ago on MQB car , work fine ...

Totaly agree with you.

[Manta1600]

It is 5C VVDI2 will not read immo tried today mate, all Hitag Pro. NCF29A1 Transponder after 2017.

There isn't MK6 registered in UK 2017

if the car is 2017 for sure is normal MQB not 5C