madsci69
24th February, 2021, 01:21 AM
Anyone with Autel IM608 who can explain the steering lock jumping procedure for the 2019 Jetta? Autel has an example for the vehicle, but it seems to not correspond to the one I'm am working on. I've attached photos of the steering wheel connector.
Autel says steering lock OR kessy. But sometimes there are bad translations. The diagram is confusing since the wiring does not match to what I have, and it doesn't show the wires that come off the back of the connector. I've indicated in the photo the indicated jump points. The one on its own to the left of the connector does not have any wire running from the connector. https://uploads.tapatalk-cdn.com/20210224/b1156c5eac3cf6f179a01116a651e591.jpghttps://uploads.tapatalk-cdn.com/20210224/bed9ffbba0a521eb5ae7795ada1d3a2d.jpghttps://uploads.tapatalk-cdn.com/20210224/2a8822da3b876830d7544c2e340c47b4.jpg
Sent from my LYA-L09 using Tapatalk
Autel says steering lock OR kessy. But sometimes there are bad translations. The diagram is confusing since the wiring does not match to what I have, and it doesn't show the wires that come off the back of the connector. I've indicated in the photo the indicated jump points. The one on its own to the left of the connector does not have any wire running from the connector. https://uploads.tapatalk-cdn.com/20210224/b1156c5eac3cf6f179a01116a651e591.jpghttps://uploads.tapatalk-cdn.com/20210224/bed9ffbba0a521eb5ae7795ada1d3a2d.jpghttps://uploads.tapatalk-cdn.com/20210224/2a8822da3b876830d7544c2e340c47b4.jpg
Sent from my LYA-L09 using Tapatalk