flashing a dm600c help needed

[loncell]

ive downloaded the "DreamUP DM600PVR" and its just not having any of it.im ok flashing my dm500c no worries so i cant understand this wont bite.
i normally have the ethernet and null modem connected to my old 500c so to flash in 2 mins but for some reason i cant get this box to connect up with DreamUP.
can someone give me a quick 1-2-3 as im not sure i got the right progs to do it.

[Devilfish]

There's a full dreamup guide here...


http://www.dream-multimedia-tv.de/dm600

[Curious123]

On my DM600 I always use the telnet method to my flash my dreambox;

Log into box via telnet.

Type:

mount -o remount,rw /boot
rm -f /boot/*
reboot

Open up a web browser and type in the ip address of your dreambox (which will be one it picks up via DHCP not the one you had set in the config). This should take you to a web page. Choose the upgrade option and point to where you have an image stored.

Before you do this you must:

Make sure you have a reasonable way to pick up the Dreambox via DHCP once you've nuked the image.

Have an NFI image to flash

Have a machine to connect to the Dreambox web interface with that can see the Dreambox over the network (this is where you'll flash from)