View Full Version : Autotuner Siemens PCR2.1 Vag.
pulsar2000
28th February, 2021, 11:47 PM
Anyone know if when Autotuner reads using OBD function, it permantly unlocks ecu ? i see under progress it says
"ECU Unlocked"
Got a slave Autotuner unit, wondering if after i can just do a OBD read with my Kess Master and perform work using this tool? Theoretically speaking ECU has been unlocked / Yes ?
haven`t tried yet or done an ID after reading with Autotuner.
Just a random thought, Anyone have any feedback.
Cheers
Tawe
1st March, 2021, 01:58 AM
In theory would work, but my brain thinks no way. Btw, If you don't try, I can try by myself on next PCR2.1.
pulsar2000
1st March, 2021, 11:27 AM
Cheers,
Will try soon as have one in next and update, or wait till you try it.
jurebv
1st March, 2021, 12:11 PM
unlock is done on write, not on read
drws3
1st March, 2021, 12:29 PM
you must unlock inbench to keep ecu unlocked so you can writte/read as many times you like afterwardes without the need to reunlock again
jurebv
1st March, 2021, 09:15 PM
you don't have to unlock on bench, you can unlock on obd with every real tool
pulsar2000
2nd March, 2021, 12:23 AM
So why says unlock when reading? i think i have transcript.
pulsar2000
2nd March, 2021, 12:24 AM
unlock is done on write, not on read
So why says unlock when reading? i think i have transcript.
pulsar2000
2nd March, 2021, 12:27 AM
you must unlock inbench to keep ecu unlocked so you can writte/read as many times you like afterwardes without the need to reunlock again
"Keep unlocked"
No it`s either Locked or Unlocked, simple as that, and no you don`t have to read on bench to unlock,
ilian_cho
2nd March, 2021, 07:43 AM
If you want to know realy ecu is unlocked-open ecu , read 25640 and post dump here.
jurebv
2nd March, 2021, 07:48 AM
every real tool will tell you if ecu is unlocked or locked on ID over obd
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.