Volvo XC60 ABS replacing

[immokill]

Hello
Mates need help ,I have to replace ABS module on 2011 XC60 2.0D . Inside ABS i found eeprom 25020 i try to swap them like in s80 but car wont start.IMMO is active!
What is procedure for replacing ABS module on this model .
Do i have to read ECU ,CEM ..
Please experts need help on this .

Thanks

Regards

[immokill]

Someone had this problem before ? Need info what to read and how to sync used ABS unit ? :(

[MartiLer]

read ECM dump and ABS ID diagnostics. synchra is done by hand.

[immokill]

Ok I will post ecm dump and abs id

[immokill]

ecu is 0281 015 286 P31303388 EDC17CP22 What i need to post eeprom or micro?

[MartiLer]

eeprom.........

[immokill]

ok I will contact you ABS that I have is not same number must find same number of Brake Control Modukle

[immokill]

abs ID 000000117998 eeprom from edc17cp22 atached

[oskars268]

yours new eeprom

[immokill]

What about CEM ?
Whe is eeprom ?

[rafal]

http://blog.obdii365.com/2019/09/27/read-volvo-cem-and-kvm-data-with-yanhua-mini-acdp/

[immokill]

What type of mcu is inside this CEM ?

[rafal]

is it visible any mark on mcu?
i think there is R5F64525

[immokill]

What type of mcu is inside this CEM ? TYPE 2 CEM

[rafal]

..............................

[immokill]

I have vvdiprog does someone has pinout for vvdiprog I think that it is stable to read with vvdiprog oiginal

[rafal]

https://www.digital-kaos.co.uk/forums/showthread.php/473754-VVDI-PROG?p=4038700&viewfull=1#post4038700

[immokill]

so must use Xprog . OK

[immokill]

what xprog version must use?

[MartiLer]

xprog 6.3.2

[immokill]

I dont have that last version is 5.84 then I buy vvdiprog

[rafal]

I dont have that last version is 5.84 then I buy vvdiprog

there is never enough equipment in our profession - sad
always must be invest - :palm2:

[immokill]

I will buy CPT or SMOOK

[brend]

I dont have that last version is 5.84 then I buy vvdiprog

For what touch cem?.........792326

Find person who have smok tool (or bay ) with full volvo litsens (or only abs litsens VO0011 , VO0012) .
Smok can learn abs/esp obd2 away .


And mr.MartiLer first you ask .....ECM dump and ABS ID diagnostics....... now you're making a suggestion him to use this ''''shut'''' xprog 6.3.2 to read sem with risks to kill cem.
Are you sure you know how to adapt the ABC to the Volvo xc60 2011-...?

[immokill]

I ask do I have to read CEM for this purpose (replacing ABS) .

[immokill]

I think that only eeprom from ecu is needed and abs ID for replacing ABS

[immokill]

SOLVED THANKS ALL and special thanks MartiLer (https://www.digital-kaos.co.uk/forums/member.php/492849-MartiLer) for eeprom

eeprom from ecu and abs id is needed for starting the car after replacing ABS
user Brend says no need to touch CEM that is true