PDA

View Full Version : Modus Immo OFF



Krtier
13th March, 2021, 12:43 PM
Hello , Sorry my english is not very good haha

Someone can make immo off for this because the car not starting :

Thanks !

rafal
13th March, 2021, 01:13 PM
no off for that ecu.......................
next time write all info about car !!!




Renault



Modus



2004



5 Doors Sedan



1.5L L4 SOHC 8V FWD



Diesel



5-Speed Manual

Krtier
13th March, 2021, 01:21 PM
I Have problem the car not want to start the immo circle in the dashboard its light up red , when i turn the key engine crackle not starting , Because this i say i think is immo , when i read the default code i find : DF048 Protection code between UCH and EPS signal incoherence

Krtier
13th March, 2021, 01:22 PM
no off for that ecu.......................
next time write all info about car !!!




Renault



Modus



2004



5 Doors Sedan



1.5L L4 SOHC 8V FWD



Diesel



5-Speed Manual




























before his i change the ecu with a another ecu of Modus

rafal
13th March, 2021, 01:24 PM
I Have problem the car not want to start the immo circle in the dashboard its light up red , when i turn the key engine crackle not starting , Because this i say i think is immo , when i read the default code i find : DF048 Protection code between UCH and EPS signal incoherence

and?
post all ecu info...........................
also write history what was done in car and why.........................

Krtier
13th March, 2021, 01:35 PM
and?
post all ecu info...........................
also write history what was done in car and why.........................

I changed the ecu because the old one no longer communicates with the car , Before her the car was stopped by losing power on the road , tells me that it can be there steering module , I dont have clip just SVCI for write and read eeprom , i send you the info of ecu in 5 second

rafal
13th March, 2021, 01:50 PM
I changed the ecu because the old one no longer communicates with the car , Before her the car was stopped by losing power on the road , tells me that it can be there steering module , I dont have clip just SVCI for write and read eeprom , i send you the info of ecu in 5 second

probably you don't know what are you doing..............
i think that will be better give this car to someone who will know what to do

Krtier
13th March, 2021, 01:51 PM
793245 i take pics

rafal
13th March, 2021, 01:51 PM
dcm 1.2 - only virgin or emu

Krtier
13th March, 2021, 01:55 PM
probably you don't know what are you doing..............
i think that will be better give this car to someone who will know what to do

I Know what i doing , I have Service Car , But not Electronic mechanician , Just mechanician , Can you just virginize file just i want test something

Krtier
13th March, 2021, 01:56 PM
Thank you already for answering me , do you have virgin file or can you virginize my file ?

Krtier
13th March, 2021, 01:57 PM
I think I don't explain myself well just, Like I said my english is not good

rafal
13th March, 2021, 02:12 PM
eeprom bad readed..................
open ecu and read in programmer
make sure what you have :
95160 or 95080.......................

Krtier
18th March, 2021, 05:56 PM
eeprom bad readed..................
open ecu and read in programmer
make sure what you have :
95160 or 95080.......................

Thanks Rafal for the reply , I solved this problem, I took the 95160 chip that you told me from the original ecu and put them on the new ecu , after i recode the injector and its ok

rafal
18th March, 2021, 05:57 PM
Thanks Rafal for the reply , I solved this problem, I took the 95160 chip that you told me from the original ecu and put them on the new ecu , after i recode the injector and its ok

well done..................next time explain better what you want to do......
for swap ecu = swap eeprom enough

Krtier
18th March, 2021, 06:45 PM
well done..................next time explain better what you want to do......
for swap ecu = swap eeprom enough

sorry I'm learning English at the same time I'm learning car electronic ^^