PDA

View Full Version : opcom obd2 16pin to 10pin on pcb



nerko
28th January, 2010, 12:14 AM
Hi
Can someone take picture of their opcom obd2 to pcb (white jack 10pins) or relevant scheme?

I think my pins from pcb (white jack) are not on correct pins on obd2.
Picture high resolution
http://img143.imageshack.us/img143/5499/dsc0023xb.jpg



thanks

vares
28th January, 2010, 12:35 AM
Here is a chart of the sample self-controlling.

nerko
28th January, 2010, 01:25 AM
Thanks vares

Pins are ok now, but don't have communication to ecu.
Tried to flash,Op*FUT message:

*** Firmware Version: 7F.0
Timeout - is your PIC empty? Not Bootloader?
Set RTS to LOW = PIC Reset
RTS low
Communication closed. Handle: 18693432


and....



*** PIC 18F 258/458
**
*
flashing...
Answer BL:N Z?hler :0000 Adresse High:00 Low:00 Checksum:6C
Bootloader abort.
Communication closed. Handle: 18693432


:smokin:Time for new pic?