edc17c46 passat b7 2.0 140hp clone -adapt need from ori ecu to donnor ecu

[cutiutza]

hy ,need to put another ecu in vw passat b7 ecu edc17c46 ecu 0281017946,the original ecu has wather damage, i have another ecu from donnor car with the same bosch number same car...need clone -adapt this to start the car withouth any erros in dash or ecu,please
the ori ecu is 0281017946 03L907309AE ----- donnor ecu is 0281017946 03L907309AE
i will atach both files separately red with ktag bdm
but need good solution my dear DK friends

[koolstuff]

Try this eprom file, Immo data is tranfered it into the new eprom

[cutiutza]

the car not starting my friend...the ecu that i buy from donnor car is with automatic transmision,and the original car its with manual transmision...can you make for me to start the car?

[elektronik325]

Friend. Make a beckup with Katag and upload to the new driver and the car should start as normal

[brend]

Try this one....

[cutiutza]

should be ok if i put the original filee full reading with ktag...to donnor ecu? the ecu is the same part no...,but i dont know if i will have problem with otp protection...
or just put only flash?..

[cutiutza]

brend (https://www.digital-kaos.co.uk/forums/member.php/450840-brend) ..the car starts with your eeprom fille and write ori flash in donnor ecu,but i have some errors and the indicator light is flashing for the glow plug, the errors are p061000,p161200,u140a00

[elektronik325]

Hi Frend. Normally when you writte beckup. This file will be uploaded Ktag to you with the opt area. I did more than once in the vag group. It always worked. Well, unless the eeprom was damaged. Well, it won't work.

[brend]

Try with donor flash and check which one falt up.
And report.



Have you odis and better if odis ingineering?
I can give for reflash good .sgo file for try solve this problem.




brend (https://www.digital-kaos.co.uk/forums/member.php/450840-brend) ..the car starts with your eeprom fille and write ori flash in donnor ecu,but i have some errors and the indicator light is flashing for the glow plug, the errors are p061000,p161200,u140a00

[cutiutza]

problem solved with lauch...i make coding online,all ok