View Full Version : vw pheaton continental kessy pin
davorOS
16th March, 2021, 06:27 PM
hi
I need pin from continental kessy on 2008 vw pheaton
I try to read it with VVdi prog but it is not suported as it stop reading on 77%
can anyone get me correct login and cs from C86 eerpom?
thank you
ASCM
16th March, 2021, 09:59 PM
It's akl or add key situation
Sent from my 5033F using Tapatalk
davorOS
16th March, 2021, 10:26 PM
hi
add key
one key work other stop working so I would like to reprogramme old key if that fail I'll made new key but I have one that work
dimon9555
16th March, 2021, 10:41 PM
Incorrect reading,or damaged dump
PierreTheron
16th March, 2021, 10:46 PM
buy a fewe tools m8 or use brain exe for it
davorOS
16th March, 2021, 11:29 PM
thank you
I try to read it few times with different machines on board and removed
but always same reading try with VVDI prog,orange and diagprog3
when use wires on VVDI prog couldn't read it,stack on 77%
I also try AVDI and VVDI2 to read ecu but failed also as it's petrol engine with LPG intalled
dump is not corupt as car start with one key without problems
Incorrect reading,or damaged dump
davorOS
16th March, 2021, 11:32 PM
I have many tools if I buy one more I don't know where would I hold themlol
buy a fewe tools m8 or use brain exe for it
dimon9555
16th March, 2021, 11:59 PM
Did you try to start the car AFTER reading the dump? If yes- bad programmer
What is load in the first post -All trash. This is not a dump of Kessy.
Read removed
Your dump is on top
davorOS
17th March, 2021, 08:56 PM
thanks
Yes car start with one key and left,I will try it next time car come to me
regards
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.