AUDI A4 - 2.5TDI - 8E0907401S IMMO OFF

[bladymir]

Hello everyone.
I need immo off for Audi A4-2.5TDI with VP44.
The pump has been changed, it always makes bzzzzzzzzzz, possibly reference is not the same. Login accepts in group 11 but error in group 50.
Eeprom and Flash attached.
READ WITH IO TERMINAL!!!!!!
Thanks.

[maniak321]

Hello, try and rep.
Remember for thanks!:-)

[bladymir]

Thank you very much my friend.
And the Flash?

[baltazar3]

Hello everyone.
I need immo off for Audi A4-2.5TDI with VP44.
The pump has been changed, it always makes bzzzzzzzzzz, possibly reference is not the same. Login accepts in group 11 but error in group 50.
Eeprom and Flash attached.
READ WITH IO TERMINAL!!!!!!
Thanks.
Here is....write both files....pm

[bladymir]

Car started once and has not started again.
It does not have a fault code, nor does it have a 14-digit IMMO ID. Is it the solution for this type of vehicle?

[bladymir]

............

[brend]

With .....bzzzzzzzz.... I have experience , this type problem ecu can't get communication with vp44 ,samething very different in HW vp44 for communication with ecu , that's it. Or pupm just bad.
For solve this problem find right pump or another for immo off but without ....bzzzzzzzz... and communication with ecu and vp44 must by ok.




Hello everyone.
I need immo off for Audi A4-2.5TDI with VP44.
The pump has been changed, it always makes bzzzzzzzzzz, possibly reference is not the same. Login accepts in group 11 but error in group 50.
Eeprom and Flash attached.
READ WITH IO TERMINAL!!!!!!
Thanks.

[bladymir]

Thank you very much my friend.
I will do as you have told me.
Thanks.

[baltazar3]

Car started once and has not started again.
It does not have a fault code, nor does it have a 14-digit IMMO ID. Is it the solution for this type of vehicle?
This is tested solution....like Brend says...change pump...
...from my experience,if pump stay out of engine long time...is useless.

[bladymir]

I have found an ecu motor with the same reference, but the flash is totally different. I'll try to rewrite my ecu, it might improve the situation.

[Gesha Nemirov]

Hi.what pump did you put in?. 059 130 106?

[bladymir]

Hi.what pump did you put in?. 059 130 106?

The pump is remanufactured, it has no label on the ecu, but the ref. On the metal part is 047050603.
The pump was bought by the owner of the car and asked me to code it.

[Gesha Nemirov]

0470506002-059130106A,D-AFB-no immo
0470506006-059130106B-AKN M/T-no immo
0470506010-059130106C-AKN A/T-no immo
0470506016-059130106E-AKE-immo
0470506030-059130106J-AYM,BFC,BCZ-immo
0470506033-059130106L-BAU,BCZ,AKE-immo
0470506037-059130106M-BDG-immo
0470506038-059130106K-BDH-immo

[Gesha Nemirov]

VP30,VP44-dignostik

[baltazar3]

I have found an ecu motor with the same reference, but the flash is totally different. I'll try to rewrite my ecu, it might improve the situation.
In EDC15VM+ IMMO is stored in both memory.What You expect with write flash from other ECU ?

[bladymir]

In EDC15VM+ IMMO is stored in both memory.What You expect with write flash from other ECU ?

I have already tried to rewrite it, I was hoping that the software of the ecu matches the one of the pump or something similar.
The ecu has died, I have recovered it with MPPS on the table in Boot Mode.
When ecu has died bzzzzzzzzz has become much stronger
I'm playing with this car all day, I don't want any more.
I return it to the owner.
Thank you very much to all.