Kess V2 piece of shit

[mrjay88]

hello all i have a fully reworked kess v2 red 5017 i followed fantomels guide replaced every component and more the 24v has been done
and blue tdk inductor in the center of the board so is fully reworked
checked all solder joints and all are spot on and replaced the sd card with a 8gb sandisk and updated it using morgano's guide
im using ksuite 2.53 and this shit kess wont read a astra g 2.0 turbo z20let bosch me1.5.5
yet my not reworked mpps v18 will no problem and has worked like charm on many ecu's but this kess wont what could be wrong with my kess have i wasted my time and money reworking it

[morgano]

Did you try with Ksuite 2.22, is the correct one for Kess 5.017.

[mrjay88]

no buddy only ever tried 2.47 and 2.53

[Leak]

Try to write edc16/17 with mpps and you will see who is shit kess or mpps :D

[tepSIJA]

Try to write edc16/17 with mpps and you will see who is shit kess or mpps :D


MPPS v18, done successfull more than 50+ EDC16 via obd, mostly VAG and PSA , via obd no problem.

[AVDigitale]

you use bad kess or something you messed with elements
but kess and clone is good tool ,mpps is good edc15 and edc16 to recovery is better then kess
best regards

[mrjay88]

Try to write edc16/17 with mpps and you will see who is shit kess or mpps :D

ive done edc16 and edc17 with mpps its never let me down its my go to tool the kess is a last resort 9 times out of 10 mpps flys through it the kess shits its self i have zero confidence in that tool
i dont know if its gonna checksum error' wake up error' error in transfer' crash or anything ive done everything to this tool and its still shit i had really high hopes for it sorry but thats my opinion

[Klaudas1331]

Kess clone = Best software for them are 2.23

[mrjay88]

Is that what most people use and recommend for there clones 2.23 and AVDigitale my clone cant be bad or have a bad component ive replaced every part from fantomels guide and added a few more parts what are not in his guide
as recommended to change the 24V fix add ET SM6T33A ST and the tdk inductor SLF7045T-220MR90-PF plus added a genuine sandisk 8gb sdcard it will read and write my car perfect wich is a siemens ppd but it did this before the rework
its like nothing has changed its still struggles on certain cars

[Stelaras26]

also be very carefull with these me1.5.5 ecu because they dont like reading-writing a lot,can be bricked easily(i have done some mistakes too),check you voltage to be more than 14v,i have done some with kess but always have external voltage regulator to keep it up