Dashboard Audi A3 2005r

[gustawo_pl]

Hello. Anyone can help me with milalage ?
Dash Audi A3 2005r VDO 8P0 920 900L, eprom 93c86 . Thanx

[el_futte]

what do the trip say?? need that

[gustawo_pl]

what do the trip say?? need that
I reset trip to 0km

[drpeter]

Hello. Anyone can help me with milalage ?
Dash Audi A3 2005r VDO 8P0 920 900L, eprom 93c86 old milage 184588km, I need 108tys km. Thanx


You can't change the mileage this way, you need a R200 for this cluster to bypass the login.

[sato-bmw]

you can also use the vag can commander for this dash

[motorsport]

You can't change the mileage this way, you need a R200 for this cluster to bypass the login.
yes because is micronas siemens fujisu

[melcool]

NO is not !
new Audi A3/TT 2007 made only after June 2006 featuring Micronas CDC3217 and 24c32 memory.
see here!
Audi A3/TT 2007 - Dashboard programmer (http://www.rosfar.com/English/Audi_A3_2007_Programmer.htm)

[PremierD]

yes because is micronas siemens fujisu

Eh! .. sorry mate ... not correct..... Its covered here ... no Micornas .. There is however siemens ..and fujitsu ..mentioned ....

http://img34.imageshack.us/img34/637/rosfarr200.png (http://img34.imageshack.us/i/rosfarr200.png/)

[gustawo_pl]

I tried :
-TachoUniversal
-MagicDash
-Vag Dash Can
-Vag commander
NOT WORK

R250 it is working with this ??

[melcool]

I tried :
-TachoUniversal
-MagicDash
-Vag Dash Can
-Vag commander
NOT WORK

R250 it is working with this ??

Very hard to believe!
Try both solutions!

[PremierD]

I tried :
-TachoUniversal
-MagicDash
-Vag Dash Can
-Vag commander
NOT WORK

R250 it is working with this ??

R250 mate is for MICRONAS .....it aint got one .. R200...is posted ...

[melcool]

also try if do by OBD:
If you can read correct mileage but can not write in, please remove the fuse for cluster and wait about 10 minutes then plug back the fuse and make mileage correction again. If it tells you “written successful” but the odometer shows 0 km, please remove the fuse for cluster and wait about 10 minutes, then plug back the fuse again, the odometer will show new mileage.
if not work:
buy R200

[juozas10]

Hello. Anyone can help me with milalage ?
Dash Audi A3 2005r VDO 8P0 920 900L, eprom 93c86 old milage 184588km, I need 108tys km. Thanx

Hi.
In eprom dump is decrypted, read the dump, and report in this post. I will try to help you.

[gustawo_pl]

Hi.
In eprom dump is decrypted, read the dump, and report in this post. I will try to help you.

Dump in first post.

[gustawo_pl]

also try if do by OBD:
If you can read correct mileage but can not write in, please remove the fuse for cluster and wait about 10 minutes then plug back the fuse and make mileage correction again. If it tells you ?written successful? but the odometer shows 0 km, please remove the fuse for cluster and wait about 10 minutes, then plug back the fuse again, the odometer will show new mileage.
if not work:
buy R200
Thanx for help, I will try tomorrow.

[melcool]

Hi.
In eprom dump is decrypted, read the dump, and report in this post. I will try to help you.

juozas10 good to have you on this forum also! :D

[melcool]

Thanx for help, I will try tomorrow.

Before you write new mileage you should confirm that it read correct mileage. If it can not read correct mileage, please don't change. Otherwise there will be problem after writing.

[gustawo_pl]

R250 mate is for MICRONAS .....it aint got one .. R200...is posted ...
Sorry my mistake

[gustawo_pl]

Before you write new mileage you should confirm that it read correct mileage. If it can not read correct mileage, please don't change. Otherwise there will be problem after writing.
I can read correct milage by tachouniversal but when i Tried write tacho says Taste and nothing !

[juozas10]

Gustawo, probobly you readed the dump wrong. I tried to read it with a lot of programs. There are no login and the mileage is not corect.

[gustawo_pl]

Gustawo, probobly you readed the dump wrong. I tried to read it with a lot of programs. There are no login and the mileage is not corect.
Dump ist correct.

[motorsport]

I can read correct milage by tachouniversal but when i Tried write tacho says Taste and nothing !

i think when diga say tast you need press reset trip on dashbord and it will done have you try?