Log in

View Full Version : Suzuki Swift PA68L0 - Advice needed



Dunker
31st March, 2021, 10:33 PM
Suzuki PA68L0
39101-68L01-HVW
Panasonic CQ-JZ41F0AE

A friend has asked me to remove "Help" from the screen on this. I'm assuming it is locked out. He lives 150 miles from me so I was wondering if its worth him bringing it to me to look at. Basically, what needs reading in the radio. Is It an eeprom, mcu, flash, jtag (what chip needs interfacing with).

Any help appreciated.

dashradio
31st March, 2021, 11:27 PM
24c64 tsopp or mssop after a full strip

Please note that code entry is only possible when "SECURITY" is shown in the display.
If the display continually shows "HELP" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, then all of your code entry attempts may have been used up, the unit will need to be decoded and reset.

savoaia
1st April, 2021, 12:05 AM
Suzuki PA68L0
39101-68L01-HVW
Panasonic CQ-JZ41F0AE

A friend has asked me to remove "Help" from the screen on this. I'm assuming it is locked out. He lives 150 miles from me so I was wondering if its worth him bringing it to me to look at. Basically, what needs reading in the radio. Is It an eeprom, mcu, flash, jtag (what chip needs interfacing with).

Any help appreciated.


You must read eeprom with an eeprom programmer.
Can use a chep programmer like CH341a

Dunker
1st April, 2021, 11:21 PM
Thanks for that, I'll have a look at it. Should have something here that will read it.

I'll post the dump when I read it.

Cheers.