PDA

View Full Version : 99 chevrolet silverado srs eprom...



raddi
29th January, 2010, 07:55 AM
Can someone help me this 99 Chevrolet Silverado SRS module?

alexb
25th October, 2010, 04:11 AM
Can someone help me this 99 Chevrolet Silverado SRS module?
I think the crash is in the bottom left 8 pin eprom(the only 8 pin on the board). However, there are lotsa numbers on it:
1202405914
9834
16257785.
Which one is the chip number??
They are in same sequence on the eprom.
The part mumber of the module is: 16249007
Any help would be appreciated.
i am working on same truck did you figure it out i need help to thanks

alexb
25th October, 2010, 04:11 AM
Can someone help me this 99 Chevrolet Silverado SRS module?
I think the crash is in the bottom left 8 pin eprom(the only 8 pin on the board). However, there are lotsa numbers on it:
1202405914
9834
16257785.
Which one is the chip number??
They are in same sequence on the eprom.
The part mumber of the module is: 16249007
Any help would be appreciated.


i am working on same truck did you figure it out i need help to thanks

raddi
25th October, 2010, 04:40 AM
O yeah, long time ago. It is Motorolla MCU inside brotha:champions:

alexb
25th October, 2010, 04:52 AM
O yeah, long time ago. It is Motorolla MCU inside brotha:champions:
what number is the mcu and what bytes do i clear thanks so much

raddi
26th October, 2010, 03:19 AM
It has MC68HC11E9 inside. Send dump and I will clear for u. Upa reads this MCU no prob,

Cheers man:ridinghorse:

alexb
30th October, 2010, 12:15 AM
It has MC68HC11E9 inside. Send dump and I will clear for u. Upa reads this MCU no prob,

Cheers man:ridinghorse:
do i have to lift any pins because i hooked it up and it dont want to read it

raddi
30th October, 2010, 03:30 AM
UPA has perfect instructions on what pins to hook up and, if needed, which ones to lift.

alexb
30th October, 2010, 04:20 AM
UPA has perfect instructions on what pins to hook up and, if needed, which ones to lift.
yes it dose and i hooked all pins the way they show and it wont read it says device not respond :( i even desoldered it and attached it to my board to solder to the pins better and still no luck wonder what im doing wrong the part number for srs module is 15192446 its for a 2005 silverado maybe its a different mcu?

raddi
30th October, 2010, 04:55 AM
it is most probably a different MCU man. Whats the mask on urs?

alexb
30th October, 2010, 05:24 AM
it is most probably a different MCU man. Whats the mask on urs?
what do you mean by mask here is the picture of module i took the mcu off
the numbers on the mcu is
12231184
185
sc510729vfn
3k85k
qqkro250
02/14/03

mcm44
30th October, 2010, 08:46 AM
3K85K = MC68HC908AS60A

raddi
30th October, 2010, 09:32 PM
MCM got it for u. Now got to the UPA instructions and see how to read it. Post dump and I will clear for u.

Cheers bro:congrats:

Redoc
31st October, 2010, 12:42 AM
what do you mean by mask here is the picture of module i took the mcu off
the numbers on the mcu is
12231184
185
sc510729vfn
3k85k
qqkro250
02/14/03

Read eeprom near mcu like 25020. maybe crach is there.
I have similar srs at CTS in table now. eeprom Atmel_412_68556 .

raddi
31st October, 2010, 09:52 PM
Read eeprom near mcu like 25020. maybe crach is there.
I have similar srs at CTS in table now. eeprom Atmel_412_68556 .
It is not eeprom like mcu man, it is motorolla MCU as mentioned above. Done many of those to date. Read dump and post, will clear for u.:champions:

alexb
11th January, 2011, 09:16 AM
It is not eeprom like mcu man, it is motorolla MCU as mentioned above. Done many of those to date. Read dump and post, will clear for u.:champions:
im having a really hard time reading there mcu i have upa and xprog please help i spent days on it :(

acr1975
12th November, 2011, 12:11 AM
hi, would you clear this dump for me?68hc11e9, 99 silverado.
Thanks in advance.