Dodge Journey 2.0 CRD -need help!

[piotreksz]

Hi everyone,
I have switched off EGR and DPF in my ecu bin, but im not sure its done properly.
I wanted to make a stage 1 modification, but this is too much for me, i dont know what to do :D
Can someone look into this file and help me with stage 1?
Thanks in advance!

Dodge Journey 2008 2.0 CRD, Powershift gearbox.
0281014579
P05094821AEGHY41
sw 1037395433
upg sw 1037396495
bin readed with kess v2

[volkswagen1234]

Post Your Ori dump. Regards

[piotreksz]

Thanks for answer.
Here you go, original bin.

[volkswagen1234]

File for You
Thx and rep for pass
Regards :)

[piotreksz]

Rep and Thanks for You.

[piotreksz]

File for You
Thx and rep for pass
Regards :)
Will you be so kind and send me a pass on PM? :)

[volkswagen1234]

Pass in PM. Regards :)

[janccuks]

Hi need some help Dodge Journey 2.0 CRD 6DCT450 (Getrag) SXT 2009 FWD

Have problems with Turbo no Boost.
No OBD2 Fault codes
Launch at Live Data show ''Red data'' on All Boost Values, on all 3 sensors ~1000 KPa at 0-660 KPa aloved (Also on not working engine)
Also Current terminal 15 Voltage are Wrong ~120 V Without working engine ~140 Volts At Working engine

Battery voltage is ok 12 and 14 Volts

No information about previous Flashing ECU (Seams DPF OFF and RGR OFF) My Feeling there is some thing wrong Wits Flash or ECU it self.
I read Flash by KessV2

Is there anyone here who can compare Flash?
No stage required-Just stock without DPF and EGR ( Swirl flaps seams work, must be checked in flash)

Or maybe there is some problem with ECU -Suggestions are welcome. Also ECU pinot P05094821AE GHY41 to Check some values with multimeter

My files can be downloaded ->
https://drive.google.com/file/d/1DKCX6nx95pTEXOH3csz4eBGxVeiwtdt6/view?usp=sharing