GolfmkI
5th April, 2021, 03:42 PM
Hello forum, I am having troubles with this car.
Not 100% sure if immo problem but 99% so I need disable.
Ive seen some threads with even same reference but they are all password protected
Someone can disable for me please?
5WY1988B
SIMK43
39103-23070
39103-23070
INDEX 08
K 16.03.07/3
5768
SW K7FCMP6A--
I,ve read with Ktag, if you need directly read by programmer let my Know , I could do it for you also.
Little tip: if you select directly by car it goes to protocol P353 but this is not correct, as this is only 1 connector (the other is fake) it uses P352 you should select manually.
1 plug SIMK43 USE P352 ( as normal 1 flash)
2 plug simk43 use P353 ( it has 2 flashes)
Be carefull with this because as pinout is different you could think Ktag is not working , but is even simpler.
Hope someone could help.
Not 100% sure if immo problem but 99% so I need disable.
Ive seen some threads with even same reference but they are all password protected
Someone can disable for me please?
5WY1988B
SIMK43
39103-23070
39103-23070
INDEX 08
K 16.03.07/3
5768
SW K7FCMP6A--
I,ve read with Ktag, if you need directly read by programmer let my Know , I could do it for you also.
Little tip: if you select directly by car it goes to protocol P353 but this is not correct, as this is only 1 connector (the other is fake) it uses P352 you should select manually.
1 plug SIMK43 USE P352 ( as normal 1 flash)
2 plug simk43 use P353 ( it has 2 flashes)
Be carefull with this because as pinout is different you could think Ktag is not working , but is even simpler.
Hope someone could help.