Need pin code for this Kessy3 eeprom 93c86 for a 2005 Bentley

[kilog]

Hello folks

I need the need pin code for this Kessy3 eeprom 93c86 for a 2005 Bentley.
I have already tried 3263 and 2490 and none of them match
the eeprom was read with Carprog as eeprom 93c86 8bits was it right?

Best regards

[cristo_844]

VIN-SCBCR63W65C025760
Immo ID-VWZ3Z0D7244708
CS-DF E5 44 C4 6A 55 D2
Pin-3263

[kilog]

I have it
but it does not work

[brend]

What you try to do?


I have it
but it does not work

[kilog]

Hello Brend,

I want to swap a kessy III
And I have decoded the donor Kessy with Carprog, but the pin code is not login in the VCDS login procedure in order to adapt it inside the car using the Ross Tech kessy swap procedure (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Immobilizer_Swapping_(Kessy))

I currently have the good and right pin code of former kessy
This eeprom comes from the used and donor Kessy that is a used one

My concern now is to decode correctly this dump
or to know in what format I must read one more time the eeprom (8bits or 16bits) using tools other than Carprog,
and how to decode the pincode

As programmer I have
- Superpro 500P from Xeltek
- Carprog Original
- Carprog Fake
- DigiProg 3 Original
- UPA programmer Fake one (that is dificult to install on my Win7)
I also have EFFI software from Luis Andre

For your information using VCDS I can read VIN and part number of the Kessy donor, what is impossible with the old one.
The only thing that is missing is the right pincode.

Thanks for your help

[cristo_844]

Read the eeprom directely it a programer and post dump!


4-digit PIN Enter zero followed by the 4-digit PIN. For example, if your PIN is 1234, enter 01234

have yuo trided this?

[lion0304]

-------- delete--------------------

[kilog]

Hello Brend,

I want to swap a kessy III
And I have decoded the donor Kessy with Carprog, but the pin code is not login in the VCDS login procedure in order to adapt it inside the car using the Ross Tech kessy swap procedure (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Immobilizer_Swapping_(Kessy))

I currently have the good and right pin code of former kessy
This eeprom comes from the used and donor Kessy that is a used one

My concern now is to decode correctly this dump
or to know in what format I must read one more time the eeprom (8bits or 16bits) using tools other than Carprog,
and how to decode the pincode

As programmer I have
- Superpro 500P from Xeltek
- Carprog Original
- Carprog Fake
- DigiProg 3 Original
- UPA programmer Fake one (that is dificult to install on my Win7)
I also have EFFI software from Luis Andre

For your information using VCDS I can read VIN and part number of the Kessy donor, what is impossible with the old one.
The only thing that is missing is the right pincode.

Thanks for your help

Hello friends,

What I can add as answer to the question WHAT I AM TRYING TO DO submitted by "brend" is WHY

The present bentley kessy unit somehow has lost its data.
When i read the eeprom its vin and immo id ARE PRESENT.

But when I read the 081 blocks in VCDS it shows XXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXX

Regards

[keyzex]

This program has never displayed two different pin codes

[kilog]

This program has never displayed two different pin codes

Thks for your contributions
But after all what do I do
I am supposed to use a 4digits pin code plus a 0!at the beginning.
And for now 03263 does not work.
What do you advise me to do?

Can you share your skype or whatsapp contact.

with me in order to look at dipper scenarios
Best regards


Sent from my iPhone using Tapatalk

[keyzex]

Check that lock time is zero, then try using pin code 35265


(0)XXXX is if the code has only four digits.

[Room]

Try this to check.

[kilog]

Check that lock time is zero, then try using pin code 35265<br>
<br>
<br>
(0)XXXX is if the code has only four digits.

Hello friends,

I was ill for almost 10days... Now I am better...

Locktime is 0

None of the pin code 03263 or 35265 works

As you can see in the attached screen shots

Any other suggestions?

Best regards

[kilog]

Try this to check.
Hello,

After replacing eeprom with a new one and writing inside the Kessy_HW12 dump,
On the car, the VIN and Kessy ID are now all XXXXXXXs asyou can see in the attached screen shot.
I am really surprised of what is appening.

Before trying on the car I have cross verified, I will double verify again... but I am not sure to discover any mis connection or mis soldering...

In the meantime, did anyone face this kind of problem before me.
How can one explain it?


Regards