KANGOO DCI KEY PROGRAMMING

[gifret]

hi friends


i m purchase key kangoo from AliExpress.


i try programme key on car of course kangoo (2012) with renolink.


when i m connect i see key identification (4008AF29) and when i validat nothing work.
801838


so i m learn dump eeprom with RenoLink and i m put identification key in the exact offset but nothing work again.


801839


i have some question.


what mean the identification key learned by RenoLink.


and what happend also i wright the identification key in eeprom and nothink work


please can some one explan me how work the key.

thanks

[Keyblade]

You need to check KEY ID then Validate.

[gifret]

hi friend
please how to check key identification

when i push button activate he want program

i have one question .

can i writ identification key in dump eeprom and verified his checksum.

thanks

[anonin88]

hi
you checked the box of your new key before validating?

https://zupimages.net/up/21/15/mvma.jpg (https://zupimages.net/viewer.php?id=21/15/mvma.jpg)

[gifret]

hi friend

already do but not work(still led immo flash fast when putting key on ).

since the key is learned and not want programmed why do not writ directly 4008AF29 in eeprom of course in good offset in my case offset 60h to 63h and 160h to 163h.
801972

i dont know if i change dump i have to change checsum and how to do.

since key new and virgin why do not work.

thanks

[hollanda]

Did you have the key pre-progammed before keylearning?

and is this remote key?
Does remote works?

[gifret]

hi hollanda (https://www.digital-kaos.co.uk/forums/member.php/531503-hollanda)

yes with remote key but no work because still not programmed.

what mean by key pre-programmed.

and what happend when i push validate button.

perhaps key have eeprom inside chip (microcontroller)and in my case has tacking any value and the key is damaged.

the thing interest for me and i m curieus to know is why i found identification key when i turn ignition on.

thanks

[hollanda]

I never used your tool!
i use R.E.T. Or avdi.
for the remote you need to put the key in learning mode.
if you dont do this the remote will not works.
for Renault Ecu Tool you need first change it.
but avdi do this automatically.

[gifret]

hi friend
can you change the size of picturs because i cant see nothing.

thanks

[hollanda]

Check the manual of Renault Ecu Tool.
immo-tools LT

http://www.immo-tools.lt/site/files/failai/User%20Manual_F.pdf

page 25