PDA

View Full Version : Seat Ibiza Instrument cluster



eden
29th January, 2010, 10:40 PM
Hello !
I have a wish to change old instrument cluster without cruise control this is 6L0920801, with my new with cruise control 6L0920820F.
when i conect this new cluster, immobilizer light flash, can i copy my old cluster EEPROM 93C86 and write in new cluster ?

Its work this ?
Or what to do ?

tnx

guerraa
31st January, 2010, 12:57 AM
hi, post the 2 dumps and we can get you the pins to adapt.

angelcom
31st January, 2010, 05:17 AM
try to change the eeproms maybe the new dash works
I did one of this

eden
31st January, 2010, 11:59 AM
after the change will work my cruise computer in new cluster ? Hm wats is in the eeproms ? Only the pin for im*obilizer oder program for working all instruments cluster ?

eden
31st January, 2010, 12:12 PM
click (http://www.gostinstvo-ploj.net/93C86.rar)

this is the eeprom from NEW instrument cluster 6L0920820F, from eeprom 93C86

pkjanny00
31st January, 2010, 12:40 PM
hi thanks for all

eden
31st January, 2010, 01:12 PM
for what ? :D

z786
31st January, 2010, 07:47 PM
hi thanks for all

you wont get it mate

MH OPW!!

eden
2nd February, 2010, 10:38 PM
Hello !
Can one calculate the pin from my eeprom file ?

6L0920820F (http://www.gostinstvo-ploj.net/6L0920820F.bin)

TECH
2nd February, 2010, 11:19 PM
Hello !
Can one calculate the pin from my eeprom file ?

6L0920820F (http://www.gostinstvo-ploj.net/6L0920820F.bin)

When you finish the change, see if you have two vins at your new cluster!

TECH
2nd February, 2010, 11:25 PM
Hello !
Can one calculate the pin from my eeprom file ?

6L0920820F (http://www.gostinstvo-ploj.net/6L0920820F.bin)

Any way you don?t have to change the cluster for the cruise control. At Ibiza 6l if I have understand.

Alex789
3rd February, 2010, 01:16 AM
Hello !
I have a wish to change old instrument cluster without cruise control this is 6L0920801, with my new with cruise control 6L0920820F.
when i conect this new cluster, im*obilizer light flash, can i copy my old cluster EEPROM 93C86 and write in new cluster ?

Its work this ?
Or what to do ?

tnx

Cruise control is not dash function, but ECU. In ECU you need enter login 11463 and that's all. Of course, you need have appropriate buttons on handle to manipulate with settings.

eden
3rd February, 2010, 09:07 AM
sory its my mistake google translate give me this for travel computer. For this i need to change instrument cluster she have a diferent LCD. Can sameone calculate my pin from .bin file ?

Alex789
3rd February, 2010, 05:28 PM
Hello !
Can one calculate the pin from my eeprom file ?

6L0920820F (http://www.gostinstvo-ploj.net/6L0920820F.bin)

Pls try 4604

eden
3rd February, 2010, 06:12 PM
Tnx :D pleas can calculate for this 6L0920801.bin (http://www.gostinstvo-ploj.net/6L0920801.bin)

Alex789
3rd February, 2010, 07:32 PM
Tnx :D pleas can calculate for this 6L0920801.bin (http://www.gostinstvo-ploj.net/6L0920801.bin)

Sorry 4604 is not correct. Will try get to both logins and inform you later.

eden
3rd February, 2010, 07:58 PM
0k tnx :D i didnt try it yet

eden
4th February, 2010, 02:29 PM
do you calculate the new PIN code ?
tnx

Alex789
4th February, 2010, 02:41 PM
Pls wait. I will inform you.

eden
4th February, 2010, 03:13 PM
ok tnx :D.......

eden
4th February, 2010, 07:24 PM
Hello !
In which adress in the EEPROM 93C86 is the PIN code and IMMO ? Whic HEX editor you recomendet me ?
tnx

Alex789
5th February, 2010, 03:15 PM
Hello !
In which adress in the EEPROM 93C86 is the PIN code and im*o ? Whic HEX editor you recomendet me ?
tnx

I use WinHex editor. First time i calculated pin as usual for such dashes VDO, but when you sent me second dump i wondered that it also had the same login. Then, in doubt, i wrote to Abrites asking their opinion and what i got:

"I think both dumps are from the same car!
Simply someone changed the VIN for them I think.
Because the PIN is the same, and also the immobilizer number is the same! And the mileage is near the same (both cars are on about 38600km). And you've calculated the PIN properly - 11FC hex, or 4604 in dec."

You had to say me before that you tried second dash to adapt in the car and then read out dump and sent me. So you made me confused.

eden
5th February, 2010, 06:02 PM
I give you two diferent dumps, one is from the tacho 6L0920801 this is my original tacho, now i try to built in the diferent tacho with board computer, this is the second dump 6L0920820 :D

I try this pin on old tacho 6L0920801 and give me a FAULT :(

Alex789
6th February, 2010, 11:22 AM
OK. So, what is wondering me, why both dumps have the same immo-3 code "SEZ7Z0B1880105" which unique to each vehicle? How it can be? Pls explain what you did exactly with dashes. Maybe you asked somebody to help you and he made something else that you didn't know? Also, i noted, that VIN in dump 6L0920801 appointed in first position and "XX...XX" in second one. Other dump has VIN in both places. But, of course, it should not be a problem. Anyway, i'll try to clear up this situation.

eden
6th February, 2010, 12:37 PM
Ok tnx for this, i must recive first the K+CAN commander for write the new dump to eeprom. Then tell you how its is

Tnx

Alex789
6th February, 2010, 03:20 PM
OK. Have you checked in dash 17, Measured blocks 08, row 24 if "0" in all fields? If no, so login will not be accepted. Pls check.

eden
11th February, 2010, 10:20 PM
hello !
I recieve the VAGTacho and write the new eeprom file to my new dashboard, i reed the PIN and shee says is 4604. I try to program new key, give him this pin 4604, and shee say me PIN is wrong ?!

Later i took VAG-COM and i go to 17 Instrument, then mass block reading and adress 21, heer i see the curent program keys is 0 ?!
How can i program the new key ? Can i copy IMMO from old dashboard to new ?

What to do :ridinghorse:

andresfn18
12th February, 2010, 12:22 AM
:wavey:
hello !
I recieve the VAGTacho and write the new eeprom file to my new dashboard, i reed the PIN and shee says is 4604. I try to program new key, give him this pin 4604, and shee say me PIN is wrong ?!

Later i took VAG-COM and i go to 17 Instrument, then mass block reading and adress 21, heer i see the curent program keys is 0 ?!
How can i program the new key ? Can i copy im*o from old dashboard to new ?

What to do :ridinghorse:

YOUR PROBLEM IS THE BLOCKING TIME OF THE DASH
CHECK CHANEL 24 MEASURING BLOCKS 4 FIELDS MOST BE 0

I HOPE IT`S HELP YOU:wavey:

Alex789
12th February, 2010, 09:26 AM
OK. Have you checked in dash 17, Measured blocks 08, row 24 if "0" in all fields? If no, so login will not be accepted. Pls check.

Have you done as i wrote to you?

If you will find zeros there and login still be not accepted, so your dump, i think, is corrupted. I remind you that both dumps contain the same im*o number. It's impossible.
"0" in field 4 of row 21 means that there are no adapted keys.

eden
12th February, 2010, 09:54 AM
For this immo why is the same number in two dumps, can i explain. I was in Seat servis, and there I was trying to copy old dashboard to this new only the (km, immo and VIN) so this is the same in both dashboards :D
Cann you IMMO OFF ? I go check for this zeros in mesuring block 24

Alex789
12th February, 2010, 11:49 AM
Immo off is applied to ECU, not to dash.
It's very easy to swap the dash in this case and readapt the existing keys, but login should be accepted.

eden
12th February, 2010, 12:05 PM
i read now the mesuring data in 17-instrument:
in chanel
22 is 0 1 0 0
23 is 0 0 0 6
24 is 9 0 0 9

Can you change data in the new dashboard with this in old, only immo and this

Alex789
12th February, 2010, 04:28 PM
According to your data:
- 22 (2 field) - ECU answers - OK.
- 23 (1 and 3 fields), there is no transponder (chip) in your key or it's of wrong type.
- 23 (4 field) - im*o system is in good condition.
- 24 (1 field) - Instrument cluster should be powered with ignition on untill digit 9 countdown to 0.
- 24 (4 field) - Transponder recognition is bad.

First of all check your key. You have to use your own keys or virgin transponders only and not from any other car, because there chips (Megamos 48) are locked.

eden
12th February, 2010, 05:22 PM
Hello !
I did it wiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii its working :D I copy al adresses from 0 to 176 hier is the immo in old tacho witch working, to may new tacho in the same adresses, and now may tacho with board computer working :D Its simpl :D

Thanks to alll