IMMO Off passat b6 BMP

[ktutza2006]

Hello,

Can someone help me with immo off for passat b6?
Info here:
- EDC16U34
- 03G 906 021 K
- eeprom 95320

Thanks

[Panathaole]

Hello,

Can someone help me with immo off for passat b6?
Info here:
- EDC16U34
- 03G 906 021 K
- eeprom 95320

Thanks


Hi

try this one....

[ktutza2006]

Thank you. Will send pass via pm?

[ktutza2006]

cannot send you pm, cause your inbox is full.

I have one question - do you have any idea how to unblock CCM? won't let me put ignitions, elv was removed and put back, now inserting key do nothing, and also on address 25 - immobilizer won't accept my login.
I have an epprom dump from before, restoring it would work?

Thanks

[Panathaole]

have you write the eeprom that i send? with your ori eeprom the key is accepted?

[ktutza2006]

I wrote it, will test on the car in 15min and let you know. Key worked before, have 2 keys, both ok.

[ktutza2006]

Ecu is back on the car, but i have no ignition. Can ccm be blocked for some reason?

[ktutza2006]

Ok, so managed to get it work, but immo off does not work.
Still getting steering column defective and error on engine that starting blocked by immo.

Can you help?

[Gesha Nemirov]

Hi.Try....................

[ktutza2006]

Both works, probably something wrong on my side. Than you guys.

Now I have another issue, the steering column defective message still appear. Is there a way to make it not appear? :D

I have another passat, same issue, immo off for 4 months now, but that one don't pop the error.

Can immo/verification of ELV be disabled from CCM or other place?


Thanks

[kiszka]

Both works, probably something wrong on my side. Than you guys.

Now I have another issue, the steering column defective message still appear. Is there a way to make it not appear? :D

I have another passat, same issue, immo off for 4 months now, but that one don't pop the error.

Can immo/verification of ELV be disabled from CCM or other place?


Thanks

probably because of ELV you decided to do immo off
now repair the ELV

[ktutza2006]

The thing is elv is new. Was coded, worked for a day, and then throwed error for steering lock again. That's why i choosed to do immo off

[elektronik325]

Hi Frend. Check the harness for Elv. Is it not worn somewhere and does not make a disturbance. Also check that you have adequate power supply on Elv. Often the fuse does not make full contact. Well, is it okay? Because if you have a new Elv. and it is the same then something must be wrong

[ktutza2006]

Checked wires, power supply to ELV, all good there.

I thing is CCM. Did an update with odis 2 days ago, so far so good. If error appear again, will change CCM, is quite cheap.
Thanks for the tips!