Renault Laguna 2006 year uch problem

[tirnanic malisa]

Hey guys i need help it 's a laguna 2,the problem arose by inserting the card 2 times, he accepted the code and gave the contact. When I inserted the card into the reader for the third time, nothing happens, I press start and the light starts flashing rapidly.I tried with fvdi to report the cards again but it doesn't allow.When I read it with a Renault chip, the contact appears for a few seconds and disappears.When I switch the relay after the contact the contact appears but in the parameters it sees 3 cards but in the reader it does not see them and the ignition lock is active.Uch sees the reader and says it's ok, i tried the reader on another car and it has power on it.Inside is uch X74 2N1 sagem 28115348-1A 8200534446 eprom 95160.
Someone had this problem, even if they could help
Thanks
I forgot to write fvdi read code 711813892D3E

[dijo]

Try to read your Card with any suitable programer to see if your transponder is alive...

[tirnanic malisa]

VVDI KEY Tool ,on it I reviewed both are ok

[tirnanic malisa]

Problem solved,maybe it will help someone, when coding by mistake, the free hand function is turned on, ie kajles go I just turned it off and the uch works normally.