PDA

View Full Version : Original file BMW E46 330d 1037351761 7789376 0281010314



Marzocchi
28th April, 2021, 10:06 PM
Hi there,

I just bought a BMW E46 330d.
The car has a Stage 1 on it. I need the original file to pass MOT.
Can anyone help me?

Attached you receive the current file.
Maybe someone can tell me if the Stage 1 map is any good and if EGR is turned off?

Thanks and regards!

peechie
29th April, 2021, 08:21 AM
Here, be careful. BMW common to use same SW/HW numbers for different ECUS

Marzocchi
29th April, 2021, 09:40 AM
Thank you very much. I appreciate your help.
What do you mean by "be careful"? What might happen? How can I check? I'm unfortunately quite new to this :)

bobolin4o
29th April, 2021, 04:24 PM
Here, be careful. BMW common to use same SW/HW numbers for different ECUS


Your file is different version!
At least you can check before posting!

bobolin4o
29th April, 2021, 04:26 PM
Hi there,

I just bought a BMW E46 330d.
The car has a Stage 1 on it. I need the original file to pass MOT.
Can anyone help me?

Attached you receive the current file.
Maybe someone can tell me if the Stage 1 map is any good and if EGR is turned off?

Thanks and regards!

Exactly same, original!
BTW, the mod is terrible... duration is altered from 7 mg to the end...
The EGR was not touched...

And finally... i don't know how you read this file (mean which tool), BUT! write my file, checking the option FULL WRITE!
Regards!

peechie
29th April, 2021, 04:34 PM
Your file is different version!
At least you can check before posting!

I did mention that it could be different version, I didn't have any others...

same SW numbers

bobolin4o
29th April, 2021, 04:39 PM
I did mention that it could be different version, I didn't have any others...

same SW numbers

Yes, you did...
But you can first to check the differences between your file and his file...
Anyway...
Regards!

Marzocchi
29th April, 2021, 06:55 PM
Exactly same, original!
BTW, the mod is terrible... duration is altered from 7 mg to the end...
The EGR was not touched...

And finally... i don't know how you read this file (mean which tool), BUT! write my file, checking the option FULL WRITE!
Regards!

Thank you very much for checking and the original file!
I use FGTech Galletto V54 0475

Will a full write (option is available) work with this and your file format?

bobolin4o
30th April, 2021, 06:59 AM
Thank you very much for checking and the original file!
I use FGTech Galletto V54 0475

Will a full write (option is available) work with this and your file format?

Yes, the file was read with FG 54 exactly.
Regards!

Marzocchi
30th April, 2021, 09:35 AM
Yes, the file was read with FG 54 exactly.
Regards!

Thank you. Will give it a try tonight and report.
Best regards

Marzocchi
2nd May, 2021, 12:18 AM
Yes, the file was read with FG 54 exactly.
Regards!

Hi bobolin4o, today I tried to write your file. Unfortunately it didn't work.

First I got a message "Checksum not ok..". Clicked ok.

Then the attached message appeared.805916

I tried to read the current software and then wrote the existing software angain. I got the Checksum message as well, but nevertheless, writing the existing software did work.

sorry to ask thins newbie question, but what went wrong and what do I habe to do?

Thanks in advance and regards
Bernd

bobolin4o
3rd May, 2021, 08:19 AM
Don't know what to say...
The file is completely original, same reference, same car, the checksum is fine.
I can say, that i've flashed such ECU with completely different software with FG without problem...
Anyway... try to flash this file with option "tables", it is your file with tuning maps restored to ori, the checksum is ok.
The other thing, if again came with error... turn ignition off after identification, wait 10 sec, give it on again and then flash.
Regards!

Marzocchi
7th May, 2021, 09:29 AM
Don't know what to say...
The file is completely original, same reference, same car, the checksum is fine.
I can say, that i've flashed such ECU with completely different software with FG without problem...
Anyway... try to flash this file with option "tables", it is your file with tuning maps restored to ori, the checksum is ok.
The other thing, if again came with error... turn ignition off after identification, wait 10 sec, give it on again and then flash.
Regards!

Hi bobolin4o, thank you very much for your help end efforts. It now worked out perfectly. I hope we will pass MOT now :)
Do you have a coffee cash box?

gkogkolos
16th January, 2023, 09:43 PM
Press Reputation & Thanks buttons = Password in PM


regards