VW Blaupunkt radio code

[xhead]

Hi, can someone calculate the radio code for:


VWZ1Z3W3154431

Bosch Gruppe
7 647 857 060/001


Gamma II (M327) | C
357 035 186




Thank You :peaceful:

[dvb_gsm]

Hi..

open the cover and send a clear picture of the motherboard

[xhead]

Here's the board
805312

[dvb_gsm]

Hi..

you have to solder a 1N4148 diode and a 47 Ohm resistor

[xhead]

ok, is there a diagram where to solder exactly? What does it do?

[dvb_gsm]

take a good look at the picture and you will find out how to solder the components

[xhead]

Thx I missed the marking in the first pic. I ordered the parts. Will take some days.
Will it start then without a radio code or what will it do? How do I get the radio code?

[dvb_gsm]

Hi..

code Off friend

[strzyzol]

I made this processing but I still have a safe

[Decode Ghost]

I made this processing but I still have a safe
hi,
don't spam
post 6 look at the picture carefully, you will see the renovation

[strzyzol]

hi,
don't spam
post 6 look at the picture carefully, you will see the renovation


I made renovation but still Safe

[Decode Ghost]

I made renovation but still Safe
47 om resistance try

[strzyzol]

47 om resistance try
It is 51om in other descriptions insert up to 75om

[nelutzul40]

You have 100 ohm in picture....braun, black, braun.

[Eeprom69]

Hi 47 ohm --------Yellow,violet,black

[josfiala]

Hi friends,
I have the same problem. I got VW Gamma 2 M327 - SAFE 6. I know the code from the dealer, but the display is standing Safe 6. I was 3 days and still Safe 6. I tried to fly a resistor with a diode, but without result. Somewhere I read that if it is locked on Safe 6 it is necessary to play the FIS module. Do you have any advice? Thank you.

[Raimax]

You need to read the eeprom from the ceramic. Very interesting work