EDC16U34 REMOVE PO299 DTC ?

[vwstuff]

During my boost remap process I have several P0299 DTC !
Can anyone help me to remove this one or increase boost control limits
for better flexibility ?
Thanks in advance.

[familiozo]

What to increase here! This mod is copy/paste upload original you are done.

[nikka]

There is dtc off.

[DiegoStud]

Yes, because closing your eyes to the problem is really going to help. DTCs are your friend and your only protection from yourself.

Your car thinks its underboosting- what has triggered it and when?
Is there a remote possibility you are requesting a boost target that your larger turbo is simply unable to deliver especially at lower load and RPM?
For that matter any turbo-1400mbar at idle? 3040mbar at 2058rpm?

[vwstuff]

I know Diego an agree but Increase P request don't help turbo spool up a bit faster ?
Maybe a sample of right boost map for 1756 is available somewhere?
Thanks for the dtc mod will test it later I focus on boost map...

[vwstuff]

Finally I took the time to do things right so no more Boost dtc.
To complet my mappack ( and knowledge ) I'm looking for 2 address :

PCR_bgDevMax_CUR and PCR_bgDevMin_C

[DiegoStud]

PCR_pBGDevMax_CUR- 1EC9AA- Maximum control deviation depending on oil or water temp 10x1- X axis looks like water on your SW.
PCR_pBGDevMin_C- 1EC9BE- Minimum control deviation 1x1 Value is signed, currently -300. Both in hPa/mbar

Glad you don't need them now you've done things right ;)

[vwstuff]

I always follow your advice :courage: